Epson EPL-N2000 User Manual - Page 78
Installing an Interface Card
View all Epson EPL-N2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
11. Connect the appropriate cable to the module. (To use the serial interface, you must connect a converter cable. See Appendix A for information about serial cables.) 12. Plug the power cord into an electrical outlet; then turn on the printer. To verify that the interface is working properly, print a status sheet and make sure your interface is listed under "Hardware Configurations." To do this, wait until the printer warms up (Ready appears on the control panel display and the On Line light is on); then press the Enter button twice. Installing an Interface Card Follow these steps to install an optional EPSON interface card in your printer: 1. Turn off the printer and unplug the power cable from the electrical outlet. w Warning: To avoid electrical shock, do not remove the interface slot cover unless the printer is turned off and unplugged from the electrical outlet. 2. Turn the printer so its back faces you. 4-10 Installing Options