Epson EPL-N2000 User Manual - Page 120
The position of the printout on the is incorrect., Graphics don't print correctly., The printer
View all Epson EPL-N2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 120 highlights
The emulation setting for that port may not be correct. Specify the emulation mode with SelecType (see Chapter 3) or the Remote Control Panel utility (see the Technical Information manual). If the printer still does not print correctly, contact your dealer or an authorized EPSON Customer Care Center. The position of the printout on the page is incorrect. Make sure you are using the correct page length and margin settings in your application program. Graphics don't print correctly. Make sure that your software program is set for the printer emulation you are using. For example, if you are using the PS emulation, be sure that your graphics software is set for a PS printer. If you are using a serial interface, make sure that you set the appropriate protocol settings in the SelecType Serial menu; see Chapter 3. Graphics require large amounts of memory, so you may need to install additional memory in your printer; see Chapter 4. The printer prints completely blank pages. Make sure you have enough toner by checking the SelecType Toner option in the Setup menu; see Chapter 3 for instructions. If toner is low, replace the imaging cartridge. Check that the imaging cartridge is installed correctly. 6-16 Troubleshooting