Epson FX-1050 User Manual - Page 148
ESC U, Turn Unidirectional Mode On/Off, Disable Paper-Out Sensor, Command Summary, 1B 38, ASCII
View all Epson FX-1050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 148 highlights
ESC U Turn Unidirectional Mode On/Off Format: ASCII code: ESC U n Decimal: 27 85 n Hexadecimal: 1B 55 n Comments: The following values can be used for n: 1: Mode is turned ON. (The ASCII codes 0 and 1 or the ASCII 0: Mode is turned OFF. characters "0" and "1" can be used.) Printing is normally bidirectional. This command selects unidirectional printing for more accurate positioning. ESC 8 Disable Paper-Out Sensor Format: ASCII code: ESC 8 Decimal: 27 56 Hexadecimal: 1B 38 Comments: Turns off the paper-out sensor so that you can print to the end of a single sheet of paper. ESC 9 Enable Paper-Out Sensor Format: ASCII code: ESC 9 Decimal: 27 57 Hexadecimal: 1B 39 Comments: Cancels ESC 8. Therefore, the printer beeper sounds and printing stops when the printer reaches a point approximately l/2 of an inch from the end of the paper. 8-10 Command Summary