Epson FX-1050 User Manual - Page 162
Select, Print Size and Character Width, Summary, 1B 50
View all Epson FX-1050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 162 highlights
ESC! Master Select Format: ASCII code: ESC ! n Decimal: 27 33 n Hexadecimal: 1B 21 n Comments: Selects any valid combination of the modes in the table below. The variable n is determined by adding together the values of the desired modes from the table. Mode 10 cpi 12 cpi Proportional Condensed Emphasized Double-strike Double-wide Italic Underline Dt?C Hex 0 00 1 01 2 02 b 04 8, 08 16 10 32 : 20 64 40 128 80 This command applies to both draft and NLQ. 10 cpi cannot be combined with 12 cpi, and proportional cannot be condensed. If both proportional and condensed are selected, proportional overrides condensed. Double-strike is ignored in NLQ. Print Size and Character Width ESC P Select 10 cpi Format: ASCII code: ESC P Decimal: 27 80 Hexadecimal: 1B 50 Comments: Selects 10 characters per inch printing. This command is normally used to cancel 12 cpi. 8-24 Command Summary