Epson FX-1050 User Manual - Page 188
Print One Character from Symbol Set, the codes, User-Defined Characters, shown, Command Summary
View all Epson FX-1050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 188 highlights
ESC" Print One Character from Symbol Set Format: ASCII code: ESC * c Decimal : 27 94 c Hexadecimal: 1B 5E c Comments: Prints a single character (c) from the symbol set. See the character tables in Appendix B for the symbol set and the codes to use for c. User-Defined Characters ESC = Define User-Defined Characters Format: ASCII code: ESC = nl n2 . . . nk Decimal: 27 61 nl d . . . nk Hexadecimal: 1B 3D nl n2 . . . nk Comments: If C is the total number of characters to be defined, B = (C x 13) + 2 nl = B MOD 256 n2 = INT(B/256) n3 = 20 in all cases n4 = the code of the first character to be defined n5 = 0 if the top 8 pins are used; n5 = 128 for the bottom 8 n6 = 0 in all cases n7 through nk are the data numbers that define the characters, with 11 data numbers for each character The data numbers for each character are determined as shown on the first grid for the Epson mode in the section on user-defined characters in Chapter 4. To print a user-defined character, you must use ESC I, which is described on page 8-46. 8-50 Command Summary