Epson FX-1050 User Manual - Page 153
Set Skip Over Perforation
View all Epson FX-1050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 153 highlights
ESC N Set Skip Over Perforation Format: ASCII code: ESC N n Decimal: 27 78 n Hexadecimal: 1B 4E n Comments: The variable n is the number of lines skipped between the last line printed on one page and the first line on the next page. For example, with the standard settings for line spacing (l/6-inch), and page length (66 lines), ESC N 6 causes the FX to print 60 lines and then skip 6. DIP switch 2-3 performs the same function. This setting is cancelled by ESC 0 and also by ESC C or ESC C 0. The value of n must be from 1 to 127. ESC 0 Cancel Skip Over Perforation Format: ASCII code: ESC 0 Decimal: 27 79 Hexadecimal: 1B 4F Comments: Cancels the skip over perforation set by ESC N. Overrides setting of DIP switch 2-3. Line feeding LF Line Feed Format: ASCII code: LF Decimal: 10 Hexadecimal: 0A Comments: When this command is received, the data in the print buffer is printed and the paper advances one line in the current line spacing. Command Summary 8-15