Home » Epson Manuals » Dot Matrix Printers » Epson TM U200D » Manual Viewer

Epson TM U200D Technical Reference - Page 113

Main Assembly 11, Radiating plate, carriage motor

Add to My Manuals
Save this manual to your list of manuals

Page 113 highlights

TM-U200D/U200PD Technical Manual 5. Position the lead wires of Paper detection switch sub-ass'y as shown in the illustrations, and make sure that the lead wires are as close as possible to the Frame, base surface. Lead wires of Paper detection switch sub-ass'y Lead wires of Detector sub-ass'y Main Assembly 11 Radiating plate,, carriage motor 1. Attach the Radiating plate, carriage motor to the Motor, carriage ass'y, and turn the heat sink in the direction of the arrow until it stops. Check that the Radiating plate, carriage motor surface B and surface A of the Frame, paper feed are the same height. If not, adjust the Radiating plate, carriage motor to make the surfaces the same height. Check that the motor's cables are not caught on the heat sink. Surface B Motor, carriage heat sink Motor's cables Surface A Motor, carriage ass'y Rev.B (Single-color Print Version) Frame, paper feed Disassembly, Assembly, and Adjustment 5-17

Section	Page
Using this online technical guide	1
U200D/U200PD Technical Manual	2
FCC CLASS A	5
FCC Compliance Statement	5
Revision Sheet	8
Chapter 1 Features and General Specifications	13
Features	14
Printing Specifications	14
Character Specifications	15
Paper	17
Paper Roll Supply Device	18
Receive Buffer	18
Electrical Specifications	19
Ribbon Cassette	19
External Dimensions and Weight	20
Environmental Specifications	20
Reliability	21
Safety and EMI Standards Applied	21
Printer Installation Stance	21
Hardware Configuration	22
Main Unit Specifications	23
Motor, Paper Feed	23
Motor, Carriage	23
Print Head Unit	23
Detector Sub-ass’y	23
Paper Detector Switch Sub-ass’y	24
Near-end Detector (N.E.-U200); (Optional)	24
Connectors	24
Interface Connector	24
Power Supply Connector	25
Drawer Kick-Out Connector	25
Interface	27
RS-232 Serial Interface	27
Interface Connector Pin Assignments	28
RS-485 Serial Interface (option)	30
IEEE 1284 Parallel Interface	30
Reverse Mode (Data Transmission from Printer to Ho...	30
Interface Connector Pin Assignments	32
Buttons and Switches	35
Power Switch	35
Panel Button	35
DIP Switches	36
Panel LEDs	38
Self-test	38
Performing the Self Test	38
Error Processing	39
Printer Operation When an Error Occurs	39
Data Receive Error	39
Buffer Full Printing	39
Detectors and Printing	39
Hexadecimal Dump	40
Hexadecimal Dump Function	40
Performing a Hexadecimal Dump	40
Options	40
External Power Supply PS-170	41
Features	42
Printer Mechanism Operating Principles	42
Print mechanism unit	43
Print head unit movement	44
Wire movement when a single dot is printed	44
Printing a character (9x9 font)	45
Paper Feed Mechanism Unit	46
Paper loading (semi-automatic loading)	47
Paper feeding	47
Ribbon Feed Mechanism Unit	48
Ribbon feeding	49
Detection Mechanism Unit	50
Home position detection mechanism	50
Paper detection mechanism	51
Near-end detection mechanism (optional)	51
Ribbon Switch Mechanism Unit	51
Switching from Black to Red	52
Releasing from Red to Black	52
Electrical Circuitry Operating Principles	53
Hardware Configuration	53
Principles of Operation	57
Power Supply Circuitry	57
Control Circuitry	58
CPU	59
Various detector circuits	63
Host interface circuit	64
DIP switch read circuit	65
Printer Mechanism Drive Circuit	66
Print head drive circuit	66
Chapter 3 Handling and Maintenance	68
Handling Precautions	68
Storage Precautions	68
Use Precautions	68
Paper Handling Precautions	68
Ribbon Cassette Handling Precautions	69
Replacing the Paper Roll	69
Replacing the Ribbon Cassette	71
Removing Jammed Paper	73
Using the Power switch cover	75
Maintenance	75
Periodic Checks	75
Cleaning	76
Lubricants	76
Lubrication Standard	76
Lubricants	76
Lubrication Points	77
Chapter 4 Troubleshooting	79
Self-test	79
Initiating the Self-test	79
Self-test Standby	79
Ending the Self-test	80
Troubleshooting Flowchart	81
Troubleshooting Tables	87
Error Types and Countermeasures	92
Chapter 5 Disassembly, Assembly, and Adjustment	97
Small Part Specifications	97
Disassembly	98
Removing the fuse	98
Sub-assembly A	99
Frame, paper feed unit ass’y	99
Main Assembly 1	104
Lever, ribbon switch , Spring, ribbon release , Le...	104
Main Assembly 2	106
Tension plate ass’y	106
Main Assembly 3	106
Frame, paper feed ass’y	106
Main Assembly 4	107
Motor, carriage ass’y	107
Main Assembly 5	108
Carriage sub-ass’y	108
Main Assembly 6	109
Shaft, carriage ass’y	109
Main Assembly 7	110
Shaft holder, adjusting roller	110
Main Assembly 8	111
Shaft, carriage guide ass’y	111
Main Assembly 9	111
Spring, belt tension ass’y	111
Main Assembly 10	112
Detector sub-ass’y	112
Main Assembly 11	113
Radiating plate,, carriage motor	113
Main Assembly 12	114
FFC, print head ass’y ( Single-color Print Version...	114
FPC, print head ass’y (2-color Print Version only)...	115
Main Assembly 13	116
Print head ground plate and Print head unit (Singl...	116
Print head unit (2-color Print Version only)	117
Main Assembly 14	119
Fame, ribbon knob and Frame, ribbon ass’y (Single-...	119
Main assembly 15	120
Fixing plate, cover, left and Fixing plate, cover,...	120
Main Assembly 16	121
Earth plate, ribbon frame (2-color Print Version o...	121
Main Assembly 17	122
Frame, ribbon ass’y , Spring, ribbon frame and Fix...	122
Main Assembly 18	123
Thumb-screw and Cover, head (2-color Print Version...	123
Main Assembly 1 (Case Unit)	124
Plate, cutter, lower	124
Main Assembly 2 (Case Unit)	125
Plate, upper	125
Main Assembly 3 (Case Unit)	126
Main circuit board ass’y	126
Main Assembly 4 (Case Unit)	128
Inserting the cables	128
Main Assembly 5 (Case Unit)	128
Case, lower	128
Main Assembly 6 (Case Unit)	130
Manual cutter	130
Main Assembly 7 (Case Unit)	131
Paper roll receive rollers , Case, upper , Roller,...	131
Main Assembly 8 (Case Unit)	133
Interface circuit board ass’y and Connector plate	133
Main Assembly 9 (Case Unit)	134
Plate, lower , Cover, ROM , and Rubber foot	134
Main Assembly 10 (Case Unit)	136
Caution seal AB (Single-color Print Version only)	136
Main Assembly 11 (Case Unit)	137
Cover, main and Hinge ass’y (There are two type pr...	137
Near-end detector ass’y(N.E-U200); (optional)	140
Adjustment	142
Platen gap adjustment	142
Appendix	149
RS-485 Serial Interface	149
XON/XOFF Transmit Timing	152
Data Format When Using RS-485	152
Main Circuit Board A Parts Layout	154
Main Circuit Board C Parts Layout	155
RS-232 Serial Interface Circuit Board Parts Layout...	156
IEEE 1284 Parallel Interface Circuit Board Parts L...	157
RS-485 Serial Interface Circuit Board Parts Layout...	158
Case Unit Overall Exploded Diagram (2-color Print ...	166
Printer Mechanism Unit Lubrication Points Diagram ...	167
Case Unit Lubrication Points Diagram (2-color Prin...	168