Epson TM U200D Technical Reference - Page 128
Main Assembly 4 (Case Unit), Inserting the cables, Case, lower
View all Epson TM U200D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 128 highlights
Main Assembly 4 (Case Unit) Inserting the cables 1. Insert the lead wires of the FPC, print head and the Detector ass'y into the connectors. 2. Insert the cable of the Motor, paper feed into CN6 and the cable of the Motor, carriage into CN5. At this time, make sure to insert the cables so that black or red colored side connects to the pin 1 side of each connector. Cable of the Motor, carriage Cable of the Motor, paper feed Red cable Black cable FFC(FPC), print head Main circuit board ass'y CN6 CN5 (Pin 1 side) Lead wires of the Detector ass'y Make sure not to confuse the cable of the Motor, paper feed and the cable of the Motor, carriage. Also check that the black or red side of each cable is on the pin 1 side of the connector. Main Assembly 5 (Case Unit) Case, lower 1. Attach the Case, lower to the printer mechanism assembly. It is easy to assemble if you first place portion B of the Case, lower under portion A of the upper plate. 2. Bring out the Motor, paper feed and cable of the Motor, carriage through portion C and the Detector ass'y lead wires through portion D. 5-32 Disassembly, Assembly, and Adjustment Rev. B