Epson TM U200D Technical Reference - Page 45
Printing a character (9x9 font
View all Epson TM U200D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Printing a character (9x9 font) A character is printed by energizing the print solenoids with respect to the Carriage sub-ass'y portion (the reference timing for the print solenoids is the Motor, carriage phase switching signals). The print head unit is moved 0.317 mm (0.012") (in approximately 1.05 ms) each time the Motor, carriage is rotated one step (7.5°). To print character "2," print solenoids 2 and 9 are energized first at the same timing as the Motor, carriage phase switching signal. Then, print solenoid 8 is energized at TnH (being delayed a half dot). The remaining print solenoids are energized correspondingly, and the character "2" is finally printed. Motor, carriage phase switch timing 1 2 3 4 Print solenoid 5 6 7 8 9 TnH Tn Tn+1 Tn+2 TnH(4) Tn+3 Tn+4 Tn+5 Figure 2-5 Print timing chart 2-4 Mechanism Configuration and Operating Principles Rev.B