Epson TM U200D Technical Reference - Page 141

Insert the Near-end detector's lead wires into the connector. - tm u200 manual

Get Epson TM U200D - B/W Dot-matrix Printer PDF manuals and user guides View all Epson TM U200D manuals
Add to My Manuals
Save this manual to your list of manuals

Page 141 highlights

TM-U200D/U200PD Technical Manual The value (A) is obtained by calculation only. Therefore, it may not be appropriate for all printers. 4. Attach the Spacers (if desired) and Near-end detector ass'y to the Case, lower and secure them with the screws. Make sure that the Spacers are positioned in the correct direction, as shown in the illustration. Connector CN11 Round corner Round corner of the Spacer Near-end detector ass'y (N.E-U200) CPT-B (M3x12) [0.59 to 0.78 N • m (6 to 8 kgf • cm)] 5. Insert the Near-end detector's lead wires into the connector. Near-end detector's lead wires Make sure to arrange the lead wires as shown in the illustration. 6. The inner diameter of the paper core should be 10.5 to 12.5 mm (0.41 to 0.49"). After assembling the Near-end detector ass'y, make sure that the Lever, near-end detection moves smoothly. Rev.B Disassembly, Assembly, and Adjustment 5-45

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
Rev.B
Disassembly, Assembly, and Adjustment
5-45
TM-U200D/U200PD Technical Manual
The value (A) is obtained by calculation only. Therefore, it may not be appropriate for all printers.
4.
Attach the Spacers (if desired) and Near-end detector ass’y to the Case, lower and secure them with
the screws. Make sure that the Spacers are positioned in the correct direction, as shown in the
illustration.
5.
Insert the Near-end detector’s lead wires into the connector.
Make sure to arrange the lead wires as shown in the illustration.
6.
The inner diameter of the paper core should be 10.5 to 12.5 mm (0.41 to 0.49”).
After assembling the Near-end detector ass’y, make sure that the Lever, near-end detection moves
smoothly.
Round corner
Round corner
Near-end detector ass’y (N.E-U200)
CPT-B (M3x12)
of the Spacer
[0.59 to 0.78 N • m
(6 to 8 kgf • cm)]
Connector CN11
Near-end detector’s
lead wires