Epson TM U200D Technical Reference - Page 62
ROM 512K bit, RAM CPU internal 16K bit, Data received from the interface receive buffer
View all Epson TM U200D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
TM-U200D/U200PD Technical Manual CPU pin functions Pin CPU No. Function Signal Name I/O 70 P46 HEAD2 O 71 P47 HEAD1 O 72 P48 HEAD9 O 73 P51/T04 +24VCOM SW O 74 P52 75 VCC CRCOM SW O VCC I 76 P53 PFCOM SW O 77 P54 78 VSS 79 P55 CLK REQ O VSS I RTS O 80 P56 PLED/DSW0 I/O Level TTL TTL TTL TTL TTL (+5V) TTL TTL (0V) TTL TTL Description Print head #2 drive signal Low: on Print head #1 drive signal Low: on Print head #9 drive signal Low: on Head, auto cutter, Drawer kick-out power switch Low: drive Motor, carriage power switch Low: motor drive Main power terminal (+5V) Motor, paper feed power switch Low: motor drive HOST interface CLK REQ GND terminal Host interface RTS Low: on PAPER OUT LED Low: on DIP SW 2-2 read when P100 is low ROM (512K bit) The printer control program and the character generator data are written in ROM (U8). The control program controls the basic operations of the printer. All CPU (U5) operations follow this program. RAM (CPU internal 16K bit) RAM is used as temporary storage for the following: t Data received from the interface (receive buffer) t Pattern data to be printed by the print head (printer buffer) t Data used by the CPU (U5) during processing (flags, pointers, etc.). Rev. B Mechanism Configuration and Operating Principles