Epson TM U200D Technical Reference - Page 117

Print head unit (2-color Print Version only)

Get Epson TM U200D - B/W Dot-matrix Printer PDF manuals and user guides View all Epson TM U200D manuals
Add to My Manuals
Save this manual to your list of manuals

Page 117 highlights

TM-U200D/U200PD Technical Manual 4. Apply O-10 to the Shaft, carriage of both sides of the Carriage sub-ass'y. Then move the carriage right and left to distribute the oil on the shaft. FFC, print head Portion A CPP-tite (M3x10) [0.49 to 0.69 N • m (5 to 7 kgf • cm)] Print head unit Print head ground plate Carriage sub-ass'y O-10 apply portions Hooks (Single-color Print Version) Make sure that there is a space between the slanting edge of the FFC, print head and the Carriage subass'y slanting side, and between the FFC edge and portion A. If there is no space, the FFC, print head may not be inserted into the Print head unit firmly. Remove the Print head unit and insert the FFC, print head again. Print head unit There must be space between these. FFC, print head (Single-color Print Version) Print head unit (2-color Print Version only) 1. Attach the FPC, print head to the Print head unit. Rev.B Disassembly, Assembly, and Adjustment 5-21

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
Rev.B
Disassembly, Assembly, and Adjustment
5-21
TM-U200D/U200PD Technical Manual
4.
Apply O-10 to the Shaft, carriage of both sides of the Carriage sub-ass’y. Then move the carriage
right and left to distribute the oil on the shaft.
Make sure that there is a space between the slanting edge of the FFC, print head and the Carriage sub-
ass’y slanting side, and between the FFC edge and portion A. If there is no space, the FFC, print head
may not be inserted into the Print head unit firmly. Remove the Print head unit and insert the FFC,
print head again.
Print head unit (2-color Print Version only)
1.
Attach the FPC, print head to the Print head unit.
CPP-tite (M3x10)
[0.49 to 0.69 N • m
(5 to 7 kgf • cm)]
Print head unit
Hooks
Print head
ground plate
Carriage sub-ass’y
O-10 apply
portions
Portion A
FFC, print head
(Single-color Print Version)
Print head unit
FFC, print head
There must be space
between these.
(Single-color Print Version)