Epson TM U200D Technical Reference - Page 27
Interface, RS-232 Serial Interface - dip switch settings
View all Epson TM U200D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Interface RS-232 Serial Interface Data transmission: Synchronization: Handshaking: Signal levels: Baud rates: Data word lengths: Parity settings: Stop bits: Connector: TM-U200D/U200PD Technical Manual Serial (compatible with RS-232) Asynchronous DTR/DSR or XON/XOFF control MARK = -3 to -15 V: Logic 1/OFF SPACE = +3 to +15 V: Logic 0/ON 4800, 9600 bps 7 or 8 bits None, even, odd 1 or more Female D-SUB 25-pin connector NOTES: t Handshaking, data word length, baud rate, and parity depend on DIP switch settings. t Data transmitted from the printer has 1 stop bit (fixed). Rev. B Features and General Specifications 1-15
Rev. B
Features and General Specifications
1-15
TM-U200D/U200PD Technical Manual
Interface
RS-232 Serial Interface
NOTES:
Handshaking, data word length, baud rate, and parity depend on DIP switch settings.
Data transmitted from the printer has 1 stop bit (fixed).
Data transmission:
Serial (compatible with RS-232)
Synchronization:
Asynchronous
Handshaking:
DTR/DSR or XON/XOFF control
Signal levels:
MARK = -3 to -15 V: Logic 1/OFF
SPACE = +3 to +15 V: Logic 0/ON
Baud rates:
4800, 9600 bps
Data word lengths:
7 or 8 bits
Parity settings:
None, even, odd
Stop bits:
1 or more
Connector:
Female D-SUB 25-pin connector