Garmin GPSMAP 441s Owner's Manual

Garmin GPSMAP 441s Manual

Garmin GPSMAP 441s manual table of contents:

  • Garmin GPSMAP 441s | Owner's Manual - Page 1
    GPSMAP 400/500 series ® owner's manual
  • Garmin GPSMAP 441s | Owner's Manual - Page 2
    © 2010 Garmin Ltd. or its subsidiaries All rights reserved. Except as expressly provided herein, no part of this manual may be ... medium, for any purpose without the express prior written consent of Garmin. Garmin hereby grants permission to download a single copy of this manual onto a hard drive or ...
  • Garmin GPSMAP 441s | Owner's Manual - Page 3
    ...531s GPSMAP 541/541s GPSMAP 441/441s GPSMAP 536/536s GPSMAP 546/546s Quick Links Tips and Shortcuts • Press HOME from any screen to return to the...System Settings: page 48. Using Sonar: page 57. Alarms and Messages: page 79. GPSMAP 400/500 Series Owner's Manual i
  • Garmin GPSMAP 441s | Owner's Manual - Page 4
    ... Using Tracks ...33 Using BlueChart g2 Vision ...34 Navigating with a Garmin Autopilot ...35 Viewing a Compass ...36 Viewing Numbers ...36 ... ...41 Viewing Tide-station Information ...42 Viewing Current Information ...43 GPSMAP 400/500 Series Owner's Manual Viewing Information ...36 Using Charts ...
  • Garmin GPSMAP 441s | Owner's Manual - Page 5
    ... Setting Up Sonar...60 Advanced Sonar Settings ...61 Using the Chartplotter with a VHF Radio ...63 Adding a DSC ...Using XM WX Weather and Audio ...68 Using Sonar ...57 Using XM WX Weather ...68 ...77 Using Digital Selective Calling (DSC) ...63 Index ...85 GPSMAP 400/500 Series Owner's Manual iii
  • Garmin GPSMAP 441s | Owner's Manual - Page 6
    ... using your unit. In the USA, go to www.garmin.com/support, or contact Garmin USA by phone at (913) ...(Europe) Ltd. by phone at 0808 2380000. In Europe, go to www.garmin.com/support and click Contact ... view the full Declaration of Conformity, go to www.garmin.com/compliance. iv GPSMAP 400/500 Series ...
  • Garmin GPSMAP 441s | Owner's Manual - Page 7
    Getting Started Getting Started Unit Overview POWER/ BACKLIGHT RANGE (-/+) ROCKER MARK SELECT MENU NMEA 2000 Power/Data External GPS antenna HOME GPSMAP 536/546 GPSMAP 531 SD card slot GPSMAP 546 GPSMAP 400/500 Series Owner's Manual 
  • Garmin GPSMAP 441s | Owner's Manual - Page 8
    Getting Started NMEA 2000® External GPS antenna Power/Data GPSMAP 431 GPSMAP 441/541 Turning the Unit On or Off To turn on the unit, press and ... 3). To turn off the unit, press and hold the Power key. Home Screen 2 GPSMAP 400/500 Series Owner's Manual
  • Garmin GPSMAP 441s | Owner's Manual - Page 9
    ... Zone, the DST option is not available and is automatically set to auto. GPSMAP 400/500 Series Owner's Manual System Units-specify units for on-... water alarm-only available if you are receiving sonar depth data. Select yes or No. Overhead Clearance-select the minimum ...
  • Garmin GPSMAP 441s | Owner's Manual - Page 10
    .... To allow the unit to automatically adjust the backlight based on ambient light, select auto backlight (automatic backlight is available only on the GPSMAP 536 and GPSMAP 546). 4 GPSMAP 400/500 Series Owner's Manual
  • Garmin GPSMAP 441s | Owner's Manual - Page 11
    ... and the position icon displays a flashing question mark. For more information about GPS, visit the Garmin Web site at www.garmin.com/...€”Press to select highlighted items. HOME—Press to return to the Home screen. GPSMAP 400/500 Series Owner’s Manual Using Simulator Mode Simulator mode turns the...
  • Garmin GPSMAP 441s | Owner's Manual - Page 12
    ... SD cards to transfer data such as waypoints, routes, and tracks to another compatible Garmin unit or a computer (page 45). The SD card slot is located on the lower-right...select no to cancel. The unit reboots and prompts you to adjust unit settings (page 3).  GPSMAP 400/500 Series Owner's Manual
  • Garmin GPSMAP 441s | Owner's Manual - Page 13
    ... information (page 57). Note: You must have an "s" series unit (such as a GPSMAP 441s) with a connected transducer to use sonar features. • Chart/Sonar-set up the screen to view a chart and sonar in a split screen (page 22). GPSMAP 400/500 Series Owner's Manual 
  • Garmin GPSMAP 441s | Owner's Manual - Page 14
    ..., select Charts > Navigation Chart. Your boat Exposed wreck Light Tide station Beacon Marine services Zoom scale navigation Chart with g2 Vision Exposed rock  GPSMAP 400/500 Series Owner's Manual
  • Garmin GPSMAP 441s | Owner's Manual - Page 15
    ... (page 33). Other Vessels-view information about other vessels if your chartplotter is connected to an external AIS (Automatic Identification System) or DSC (Digital Selective ... Select data bar Setup to choose different data to show on the cruising data bar. GPSMAP 400/500 Series Owner's Manual 
  • Garmin GPSMAP 441s | Owner's Manual - Page 16
    ... using an "s" series unit with a transducer attached, or a "non-s" series unit with a Garmin Intelliducer™ attached). • fuel-(available ...), navigational aids and symbols, and obstructions and cable areas. GPSMAP 400/500 Series Owner's Manual Understanding How Wind VMG and Waypoint ...
  • Garmin GPSMAP 441s | Owner's Manual - Page 17
    ... want to go. 4. Press SELECT. 5. Select navigate To. 6. Select Go To (or Guide To when using a preprogrammed BlueChart g2 Vision card for Auto Guidance). 7. ... bottom of the Navigation chart ( ). The bar under the number represents that distance on the map. GPSMAP 400/500 Series Owner's Manual 
  • Garmin GPSMAP 441s | Owner's Manual - Page 18
    ... item. If more than one item is in the area, select review, and then select the item. Service Points-turns marine service points on or off. Roses-...direction or apparent wind direction is shown if the unit is connected to a compatible marine wind sensor. GPSMAP 400/500 Series Owner's Manual 2
  • Garmin GPSMAP 441s | Owner's Manual - Page 19
    ... on the Fishing chart (page 19). The weather feature is only available if the chartplotter is connected to a weather module and you have an XM subscription. See page ... on the Rocker to decrease map detail. Press right on the Rocker to increase map detail. GPSMAP 400/500 Series Owner's Manual 
  • Garmin GPSMAP 441s | Owner's Manual - Page 20
    ... a BlueChart g2 Vision SD card. • Vehicle icon-allows you to select a boat or triangle that is large, medium, or small as your boat icon on the chart. 4 GPSMAP 400/500 Series Owner's Manual
  • Garmin GPSMAP 441s | Owner's Manual - Page 21
    ... screen. The Range (-/+) keys control the zoom level. Press MENU to view additional settings (page 9). GPSMAP 400/500 Series Owner's Manual Perspective 3D Settings To access additional settings or options from the Perspective 3D screen, select MENU...
  • Garmin GPSMAP 441s | Owner's Manual - Page 22
    ...of NEXRAD weather on or off. (The weather feature is only available if the chartplotter is connected to a weather module and you have an XM subscription.) ...to identify entry and exit routes in unfamiliar harbors or anchorages. Mariner's Eye 3D navigation Chart GPSMAP 400/500 Series Owner's Manual
  • Garmin GPSMAP 441s | Owner's Manual - Page 23
    ... display of NEXRAD weather on or off. (The weather feature is only available if the chartplotter is connected to a weather module and you have an XM subscription.) See page ... 3D screen, select MEnU > Chart Appearance. Mariner's Eye 3D (Water Hazard Colors) GPSMAP 400/500 Series Owner's Manual 
  • Garmin GPSMAP 441s | Owner's Manual - Page 24
    ...the view. NOTE: You must have an "s" series unit (such as a GPSMAP 441s) with a connected transducer to use sonar features. Fish Eye 3D Settings Fish... navigation, fishing, fuel, or sailing numbers (page 9). GPSMAP 400/500 Series Owner's Manual View-selects a fish eye view...
  • Garmin GPSMAP 441s | Owner's Manual - Page 25
    ... left arrows on the rocker to adjust the opacity. The higher you set the percentage, the more the satellite photos will cover both land and water.  GPSMAP 400/500 Series Owner's Manual
  • Garmin GPSMAP 441s | Owner's Manual - Page 26
    ... NOTE: Use the Range (-/+) keys to zoom in and out while viewing the aerial photo on the full screen. Photo Overlay at 50% 20 Photo Overlay at 100% GPSMAP 400/500 Series Owner's Manual
  • Garmin GPSMAP 441s | Owner's Manual - Page 27
    ...the rocker to highlight a camera icon with the pointer, and select Aerial Photo or review > Aerial Photo. Perspective Overhead An indicator for a tide station appears on ... coastal roads and POIs such as restaurants, lodging, local attractions and more. For 2 GPSMAP 400/500 Series Owner's Manual
  • Garmin GPSMAP 441s | Owner's Manual - Page 28
    ...Chart/Sonar screen, like the Sonar screen, is only available when using a sonar-capable unit with a transducer attached. Use the Chart/Sonar screen to view the Navigation... Automatic Identification System (AIS) enables you to identify and track other vessels. GPSMAP 400/500 Series Owner's Manual 22
  • Garmin GPSMAP 441s | Owner's Manual - Page 29
    ...time of approach to dangerous target AIS Targeting on the navigation Chart GPSMAP 400/500 Series Owner's Manual AIS Targeting Symbols Symbol... X indicates that the AIS transmission from the vessel is lost, and the chartplotter displays a message banner asking whether the vessel ...
  • Garmin GPSMAP 441s | Owner's Manual - Page 30
    ...is lost. A red X indicates that the AIS transmission from the vessel is lost, and the chartplotter displays a message banner asking whether the vessel should continue to ... projected course of the target is calculated based on the course over ground information. GPSMAP 400/500 Series Owner's Manual
  • Garmin GPSMAP 441s | Owner's Manual - Page 31
    ... 3D charts are available only if you use a BlueChart g2 Vision SD card. 1. From the Home screen, select Charts. GPSMAP 400/500 Series Owner's Manual NOTE: Mariner's Eye 3D charts are available only if you use a BlueChart g2 Vision SD card. 1. ...
  • Garmin GPSMAP 441s | Owner's Manual - Page 32
    ...about a Targeted AIS Vessel You can view the AIS signal status, MMSI, GPS speed, GPS heading, and other information that is reported about a targeted AIS ...AIS vessel. Press SELECT. 4. Select AIS Vessel > Deactivate. Deactivating a Target for an AIS Vessel 2 GPSMAP 400/500 Series Owner's Manual
  • Garmin GPSMAP 441s | Owner's Manual - Page 33
    ... 3. Select MEnU > Other Vessels > AIS List. Making a Call to an AIS Target Viewing a List of AIS Targets See "Calling an AIS Target" (page 67). GPSMAP 400/500 Series Owner's Manual 2
  • Garmin GPSMAP 441s | Owner's Manual - Page 34
    ... a Destination You can search for, and navigate to, waypoints, routes, tracks, and services such as nearby fuel, repairs, and ramps. To begin navigating: 1. From ...Home screen, select Where To?. 2. Select the category to which you want to navigate.  CAUTIOn GPSMAP 400/500 Series Owner's Manual
  • Garmin GPSMAP 441s | Owner's Manual - Page 35
    ... the 50 nearest destinations that contain your search criteria. 4. Select the location > navigate To > Go To or route To (or Guide To when using a preprogrammed BlueChart g2 Vision card). 2 GPSMAP 400/500 Series Owner's Manual
  • Garmin GPSMAP 441s | Owner's Manual - Page 36
    ... the waypoint on the navigation chart: 1. Select the waypoint on the Navigation chart. 2. Select review. (The review button is only shown when more than one waypoint is in ... vicinity.) 3. Select the button for the waypoint you want to edit. 4. Select Move. GPSMAP 400/500 Series Owner's Manual 0
  • Garmin GPSMAP 441s | Owner's Manual - Page 37
    ...the pointer and measure the distance to other locations. Select MEnU > Stop Measuring to remove the measuring line. GPSMAP 400/500 Series Owner's Manual To view and sort or filter a list of all waypoints: From the Home screen, select Information > ...
  • Garmin GPSMAP 441s | Owner's Manual - Page 38
    ... edit a route: 1. From the Home screen, select Information > User Data > routes. 2. Select the route to edit. GPSMAP 400/500 Series Owner's Manual 5. Press MEnU to cancel, to undo the last turn, or to begin navigating the route. To save a ...
  • Garmin GPSMAP 441s | Owner's Manual - Page 39
    ... Eye 3D, select MEnU > Waypoints & Tracks > Active Tracks > Clear Active Track. The track memory is cleared and the current track continues to be recorded.  GPSMAP 400/500 Series Owner's Manual
  • Garmin GPSMAP 441s | Owner's Manual - Page 40
    ... & Tracks > Active Track > Active Track Options. Record interval-defines the frequency at which the track plot is recorded. Recording more-frequent plots is more accurate ... store it away from exposure to sun and rain to prevent damage to the card. NOTICE 4 GPSMAP 400/500 Series Owner's Manual
  • Garmin GPSMAP 441s | Owner's Manual - Page 41
    ... can only use the SD card on BlueChart g2 Vision-compatible Garmin GPS units and when using HomePort. navigating with a Garmin... engage the autopilot. NOTE: Autopilot can be used only with NMEA 2000 compatible chartplotters (GPSMAP 441/441s, GPSMAP 536/536s, GPSMAP 541/541s, and GPSMAP 546/546s). 5
  • Garmin GPSMAP 441s | Owner's Manual - Page 42
    ... a Compass You can view and customize numerical data including depth, GPS information, and navigation information. You can customize the number of ..., select information > dashboard > Numbers. From the Home screen, select information > dashboard > Compass.  GPSMAP 400/500 Series Owner's Manual
  • Garmin GPSMAP 441s | Owner's Manual - Page 43
    ... Gauges Viewing Engine Gauges You must be connected to a NMEA 2000 network capable of sensing engine data to view engine gauges. See the GPSMAP 400/500 Series Installation Instructions for details. GPSMAP 400/500 Series Owner's Manual 
  • Garmin GPSMAP 441s | Owner's Manual - Page 44
    ...Select the gauge limit you want to set (Scale Min, Scale Max, rated Min, or rated Max). nOTE: Some of these options may not be available for all gauges. GPSMAP 400/500 Series Owner's Manual 
  • Garmin GPSMAP 441s | Owner's Manual - Page 45
    ...in Gauges" (following section). Selecting the Engines Shown in Gauges You must manually select the number of engines shown in the engine gauges (see above) before you... MEnU > Gauge Setup > Engine Selection > num. Engines. 2. Select the number of engines. GPSMAP 400/500 Series Owner's Manual 
  • Garmin GPSMAP 441s | Owner's Manual - Page 46
    .... Viewing and Synchronizing Fuel Gauges Viewing Fuel Gauges To view engine information, your chartplotter must be connected to a device capable of measuring fuel level, fuel flow, or ... Onboard-select to specify the total fuel in your tanks. Select Done. 40 GPSMAP 400/500 Series Owner's Manual
  • Garmin GPSMAP 441s | Owner's Manual - Page 47
    ... > Dashboard > Wind. Selecting True, Apparent, or Ground Wind for the Wind Gauges The chartplotter must be connected to the peripheral devices listed below to capture the data shown on ...> MEnU > Wind Type. 2. Select Apparent Wind, True Wind or Ground Wind. GPSMAP 400/500 Series Owner's Manual 4
  • Garmin GPSMAP 441s | Owner's Manual - Page 48
    ... a heading (or magnetic) sensor, and GPS heading data is calculated by your chartplotter GPS. From the Home screen, select Information > Dashboard > Wind > MEnU > Heading .... • Select Show report to view the Tide Prediction Report for the selected station. 42 GPSMAP 400/500 Series Owner's Manual
  • Garmin GPSMAP 441s | Owner's Manual - Page 49
    ..., and the approximate sky view location of the sun and moon. By default, the chartplotter shows celestial information for the present date and time. From the Home...can select both tide-station and current-station information directly from the Navigation chart. GPSMAP 400/500 Series Owner's Manual 4
  • Garmin GPSMAP 441s | Owner's Manual - Page 50
    ...you copy or merge MapSource data to your chartplotter from a specific SD card. 44 2. Check ... > Check for Software Updates, or check the Garmin Web site at www.garmin.com. 3. Insert the SD card ... from the list. The data is transferred from the SD card to the chartplotter. GPSMAP 400/500 Series Ownerମ.
  • Garmin GPSMAP 441s | Owner's Manual - Page 51
    ...existing user data. • Select Card > replace From Card to overwrite the data on your chartplotter. Select the file name from the list. The data is transferred from the SD card... If your unit is NMEA 2000 compatible, select Card instead of Data Transfer. 8. GPSMAP 400/500 Series Owner's Manual 45
  • Garmin GPSMAP 441s | Owner's Manual - Page 52
    ... 1. Connect the unit to a NMEA 2000 network. (Refer to the GPSMAP 400/500 Installation Instructions.) Only the following units are NMEA ... GPSMAP 441/441s GPSMAP 536/536s GPSMAP 541/541s GPSMAP 546/546s 2. From the Home screen, select Information > User Data > Data Transfer > network. 3. Complete one...
  • Garmin GPSMAP 441s | Owner's Manual - Page 53
    Viewing Information To restore backup data to your chartplotter: 1. Copy the appropriate .ADM file from the computer to an SD card in the Garmin\UserData folder. 2. Insert the SD ... information about all of the boats your unit is monitoring. See page 23. GPSMAP 400/500 Series Owner's Manual 4
  • Garmin GPSMAP 441s | Owner's Manual - Page 54
    ..., and pressure. NOTE: You must be receiving NMEA sonar depth data or have a built-in sonar with a temperature-capable transducer to view depth and water temperature information. GPSMAP 400/500 Series Owner's Manual
  • Garmin GPSMAP 441s | Owner's Manual - Page 55
    Configuring the Chartplotter Heading-sets the reference used in calculating heading information. • auto Magnetic-automatically sets the ... automatically turns daylight saving time on or off, depending on the time of year. GPSMAP 400/500 Series Owner's Manual • baro. Ref. Time-specify the...
  • Garmin GPSMAP 441s | Owner's Manual - Page 56
    Configuring the Chartplotter • Safe depth-set the minimum depth (chart depth datum) to allow when calculating an Auto Guidance path. A safe ..., from the Home screen, select Configure > Preferences > navigation > Auto Guidance > Shoreline Distance > Farthest. GPSMAP 400/500 Series Owner's Manual
  • Garmin GPSMAP 441s | Owner's Manual - Page 57
    ... 0183 data, DSC, and sonar NMEA input support for the DPT, MTW, and VHW sentences. • GPSMAP 400/500 Series Owner's Manual • Posn. Precision-adjust the number ...resets all NMEA 0183 sentences to the default setting. NMEa 2000 Setup NOTE: The GPSMAP 431/431s and GPSMAP 531/531s ...
  • Garmin GPSMAP 441s | Owner's Manual - Page 58
    Configuring the Chartplotter • device List-lists the NMEA 2000 devices on your network. If a NMEA 2000 device has configuration options or .... 2. Select an alarm category. 3. Select an alarm. 4. Select On to turn on the alarm. 5. Specify alarm information. GPSMAP 400/500 Series Owner's Manual
  • Garmin GPSMAP 441s | Owner's Manual - Page 59
    ...: You must be receiving NMEA sonar depth data or have a built-in sonar with a temperature-capable transducer to view depth and water temperature information.. Shallow .... deep water-set an alarm to sound when the depth is greater than the specified value. GPSMAP 400/500 Series Owner's Manual 5
  • Garmin GPSMAP 441s | Owner's Manual - Page 60
    ...must have a subscription to XM WX Weather and a connected Garmin XM WX weather receiver to view weather information (page 68). 1. From the ...number. 2. From the Home screen, select Configure > My Boat > Keel Offset. GPSMAP 400/500 Series Owner's Manual Setting the Total Fuel Onboard Alarm You can ...
  • Garmin GPSMAP 441s | Owner's Manual - Page 61
    ... You must have a NMEA 0183 water-temperature sensor, a Garmin Intelliducer, or a temperature-capable transducer to measure water temperature. Calibrate water Speed-use this... speed sensor is not registering a speed, a "Speed Too Low" message appears. GPSMAP 400/500 Series Owner's Manual 55
  • Garmin GPSMAP 441s | Owner's Manual - Page 62
    ...check the cable connections. If you continue to get the message, contact Garmin Product Support. fuel Capacity-enter the combined fuel capacity of all the engines...when a vessel enters the safe zone. When Off is selected, the message will not be displayed. 5 GPSMAP 400/500 Series Owner's Manual
  • Garmin GPSMAP 441s | Owner's Manual - Page 63
    Using Sonar Using Sonar When connected to a transducer, the following chartplotters can be used as fishfinders: GPSMAP 431s GPSMAP 536s GPSMAP 441s GPSMAP ...of sonar readings Transducer frequency or beam width Full Screen GPSMAP 400/500 Series Owner's Manual Water depth at...
  • Garmin GPSMAP 441s | Owner's Manual - Page 64
    ... Sonar Understanding the Split Frequency Screen Use the Split Frequency screen (dual-frequency transducer only) to view both the 50 kHz and ...scale Range Zoom level Zoom window Range Transducer frequency or beam width Frequencies Split Frequency 5 GPSMAP 400/500 Series Owner's Manual Split Zoom
  • Garmin GPSMAP 441s | Owner's Manual - Page 65
    ...Understanding the Temp Log Screen If you are using a temperature-capable transducer, the Temp Log screen keeps a graphic log of temperature readings ... time elapsed appears along the bottom. The graph scrolls to the left as information is received. GPSMAP 400/500 Series Owner's Manual Temp Log 5
  • Garmin GPSMAP 441s | Owner's Manual - Page 66
    ... No background information appears. Suspended targets appear as symbols with no background information shown. The target depth of each symbol is displayed. GPSMAP 400/500 Series Owner's Manual Setting Up Sonar Use the Sonar Setup screen to define ...
  • Garmin GPSMAP 441s | Owner's Manual - Page 67
    ... If the screen is cluttered, decrease the gain. frequency-when using a dual frequency transducer, select how the frequencies appear on-screen (200kHz, 50kHz, dual, or auto). ...to position the pointer over the fish or structure you want to mark. 3. Press SELECT. GPSMAP 400/500 Series Owner's Manual
  • Garmin GPSMAP 441s | Owner's Manual - Page 68
    ... to show the most detail with the least noise. When frequency is set to dual (and gain is set to Manual), you can individually adjust noise rejection for each frequency. 2 GPSMAP 400/500 Series Owner's Manual
  • Garmin GPSMAP 441s | Owner's Manual - Page 69
    ... up and send individual routine call details to your Garmin VHF radio. When you initiate a man-overboard distress ... 0183 network or a NMEA 2000 network. nMEA 0183 nMEA 2000 Garmin nMEA VHF radio VHF radio 0183 VHF radio X X X X X X X X X Garmin nMEA 2000 VHF radio X X X X X X GPSMAP 400/500 Series ...
  • Garmin GPSMAP 441s | Owner's Manual - Page 70
    ... of the vessel, and select Done. If your Garmin chartplotter and VHF radio are connected via NMEA 0183 or NMEA 2000, your chartplotter alerts you when your VHF radio receives a DSC ... chart screen, press MENU > Other Vessels > dSC > dSC List. 4 GPSMAP 400/500 Series Owner's Manual
  • Garmin GPSMAP 441s | Owner's Manual - Page 71
    ...placing distress calls from your Garmin radio, see your Garmin VHF Radio Owner's Manual. For information on activating navigation to a man-overboard location, see page 30. GPSMAP 400/500 Series Owner's Manual 5
  • Garmin GPSMAP 441s | Owner's Manual - Page 72
    ... every vessel. Placing an Individual routine Call When you connect your Garmin chartplotter to a Garmin VHF NMEA 2000 compatible radio, you can use the ... following channels on which you want to communicate. The radio transmits this request with your call.  GPSMAP 400/500 Series Owner's Manual
  • Garmin GPSMAP 441s | Owner's Manual - Page 73
    ... Send to send the information about the call to the radio. 5. On your Garmin VHF radio, select Call. Calling ...AIS Target When you connect your Garmin chartplotter to a Garmin VHF NMEA 2000 compatible ...information about the call to the radio. 4. On your Garmin VHF radio, select Call. GPSMAP 400/500 ...
  • Garmin GPSMAP 441s | Owner's Manual - Page 74
    ... Audio In order to use XM weather and audio, you must have a compatible Garmin XM WX receiver, such as a GXM 51, and an activated XM subscription. Visit http... Center. (See the XM WX Satellite Weather Web site at http://xmwxweather.com for more information.)  GPSMAP 400/500 Series Owner's Manual
  • Garmin GPSMAP 441s | Owner's Manual - Page 75
    ... the upper-left corner of the screen indicates the elapsed time since the National Weather Service last updated the information. You can view NEXRAD information as an image of ... cells, lighting strikes, and hurricane warnings. NEXRAD shows very light rain and GPSMAP 400/500 Series Owner's Manual 
  • Garmin GPSMAP 441s | Owner's Manual - Page 76
    ...icons. Lightning appears on the map if strikes were detected within the last seven minutes. The ground-based lightning detection network only detects cloud-to-ground lightning. 0 GPSMAP 400/500 Series Owner's Manual
  • Garmin GPSMAP 441s | Owner's Manual - Page 77
    ... about the warning, select the warning area. The light blue lines on the chart indicate marine weather warning zones. Marine Warning Hurricane ... with the color corresponding to the warning. To view information about the warning, select the county. GPSMAP 400/500 Series Owner's Manual 
  • Garmin GPSMAP 441s | Owner's Manual - Page 78
    ... a high-pressure center in any horizontal direction results in decreased pressure. Winds flow clockwise around high-pressure centers in North America. GPSMAP 400/500 Series Owner's Manual
  • Garmin GPSMAP 441s | Owner's Manual - Page 79
    ... Fishing view contains current water temperature, surface pressure conditions, and fishing forecasts. From the Home screen, select information > weather > fishing. GPSMAP 400/500 Series Owner's Manual 
  • Garmin GPSMAP 441s | Owner's Manual - Page 80
    ... > MEnU > Fish Species. 4 Understanding Wave Height The Wave Height feature shows wave heights. The wave heights for an area are shown in color intensities. GPSMAP 400/500 Series Owner's Manual
  • Garmin GPSMAP 441s | Owner's Manual - Page 81
    ... to select next. The forecasted visibility for the next 12 hours is shown. 2. Select next again to view forecasts for the next 24 and 36 hours. GPSMAP 400/500 Series Owner's Manual 5
  • Garmin GPSMAP 441s | Owner's Manual - Page 82
    Using XM WX Weather and Audio Using XM Audio When a Garmin XM receiver is connected to the audio input of your boat, you can listen to XM audio channels. ... the XM audio guide. Channel Entry-allows you to select an XM channel. Level-adjusts the volume.  GPSMAP 400/500 Series Owner's Manual
  • Garmin GPSMAP 441s | Owner's Manual - Page 83
    ...to 55ºC) Compass-Safe distances: Model number GPSMAP 536/546 GPSMAP 431/441 GPSMAP ... Receiver: High-sensitivity, 14 parallel channel, WAAS-capable receiver. GPSMAP 431/431s GPSMAP ...parallel channel, WAAS-capable receiver. GPSMAP 536/536s GPSMAP 546/546s Update Rate: once per second GPSMAP 400/500 ...
  • Garmin GPSMAP 441s | Owner's Manual - Page 84
    ...Warm:* Approximately 1 second Cold:** Approximately 38 seconds GPSMAP 536/536s GPSMAP 546/546s Warm:* Approximately 15 seconds Cold:** Approximately ...max at 13.8 Vdc fuse: AGC/3AG - 3.0 A Sonar Power: 1 kW Transducer (1 kW transducers are supported by the GPSMAP 536s and 546s units only), 1,000 W (...
  • Garmin GPSMAP 441s | Owner's Manual - Page 85
    ... the input voltage to the maximum voltage allowed (or less) for your chartplotter. GPSMAP 400/500 Series Owner's Manual boat is Not Moving fast Enough to Calibrate-... and reinsert. Contact your dealer or Garmin Product Support if the problem persists. Can't write User Card,...
  • Garmin GPSMAP 441s | Owner's Manual - Page 86
    ... with an MMSI. database Error-internal problem with the unit. Contact your dealer or Garmin Product Support to have the unit serviced. deep water alarm-the Deep Water ... uploaded route from another device has more than 250 waypoints and was truncated to fit. GPSMAP 400/500 Series Owner's Manual
  • Garmin GPSMAP 441s | Owner's Manual - Page 87
    ...problem with the unit. Contact your dealer or Garmin Product Support to have the unit serviced. Sonar Service Lost-the external sonar device ...data can be stored without deleting old data to create memory space. GPSMAP 400/500 Series Owner's Manual Track Truncated-a complete uploaded track does...
  • Garmin GPSMAP 441s | Owner's Manual - Page 88
    ... Honda engines are running in a fuel-efficient mode and engine RPM is displayed. Consult your Honda engine manual to determine if the engine is NMEA 2000 compatible. GPSMAP 400/500 Series Owner's Manual
  • Garmin GPSMAP 441s | Owner's Manual - Page 89
    ... nMEA 2000 The following GPSMAP 400 and GPSMAP 500 series chartplotters are NMEA 2000 certified and can receive data from a NMEA 2000 ... boat. GPSMAP 441/441s GPSMAP 541/541s GPSMAP 536/536s GPSMAP 546/546s provided "as is" and XM and Garmin disclaim any and all warranties, express and implied,...
  • Garmin GPSMAP 441s | Owner's Manual - Page 90
    ...of age in the 48 contiguous United States. XM WX is a trademark of XM Satellite Radio Inc. GPSMAP 400/500 Series Owner's Manual Software License Agreement BY USING THE GPSMAP 400/500 SERIES CHARTPLOTTER, YOU AGREE TO BE BOUND BY THE TERMS AND CONDITIONS OF THE ...
  • Garmin GPSMAP 441s | Owner's Manual - Page 91
    ... 51 Compass 36 compass rose 12 contact information, Garmin iv coordinates, grid creating waypoints using 30 ...Calibrate Water Speed 55 celestial information 43 Chart/Sonar screen using 22 Chart Borders 14 chart ... chart 19 AIS 27 MARPA 27 fishing information 73 5 GPSMAP 400/500 Series Owner's Manual
  • Garmin GPSMAP 441s | Owner's Manual - Page 92
    ... information 70 Light Sectors 14 low-pressure center 72 n G gain 61 Garmin Data Transfer 51 go to 28 GPS 5, 48, 78 GPS heading 42 Grid (North) ... 5 power source 78 product registration iv Proj. Heading 25 quick links i GPSMAP 400/500 Series Owner's Manual Q
  • Garmin GPSMAP 441s | Owner's Manual - Page 93
    ...tide stations 42 viewing information 12 Time (options) 49 Time to 56 tracks 18, 33 Trails 25 transducer dual frequency 61 transferring data 44, 45 Trip Odometer 37 True ... 48 user data backing up 45 clearing 44 transferring 45 viewing 44  GPSMAP 400/500 Series Owner's Manual
  • Garmin GPSMAP 441s | Owner's Manual - Page 94
    ... existing 16, 30 mark current location 30 moving 30 viewing 44 weather 68  XM Audio 76 XM weather 68 zoom 61 2x 61 4x 61 bottom lock 61 manual 61 split 62 GPSMAP 400/500 Series Owner's Manual
  • Garmin GPSMAP 441s | Owner's Manual - Page 95
  • Garmin GPSMAP 441s | Owner's Manual - Page 96
    ..., Inc. 1200 East 151st Street, Olathe, Kansas 66062, USA Garmin (Europe) Ltd. Liberty House, Hounsdown Business Park, Southampton, Hampshire, SO40 9LR UK Garmin Corporation No. 68, Jangshu 2nd Road, Sijhih, Taipei County, Taiwan www.garmin.com June 2010 Part Number 190-01230-00 Rev. A ...



Type your new search above

The manual viewer requires the flash plugin to be installed and enabled.
To view this page ensure that Adobe Flash Player version 10 or greater is installed.

Garmin GPSMAP 441s Manual