Garmin Map 60 Owner's Manual - Page 57
Interface Setup
UPC - 689076190107
View all Garmin Map 60 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
RTCM In - Provides DGPS input using a standard RTCM SC-104 format. No output. RTCM In/NMEA Out - Allows DGPS input using a standard RTCM SC-104 format and supports the output of standard NMEA 0183 version 3.01 data. RTCM In/Text Out - Allows DGPS input using a standard RTCM SC-104 format and supports the output of simple ASCII text output of location and velocity information None - Provides no interfacing capabilities. To change an Interface Setup feature: 1. Access the Interface Setup Page as explained at the beginning of this section. 2. Highlight the desired setting and press ENTER. 3. When you select Text Out and /or RTCM In, additional fields will appear. Use the ROCKER key to highlight "Baud Rate" and press ENTER. Use the ROCKER key to highlight the desired setting and press ENTER. 4. For Garmin DGPS or RTCM In/NMEA Out, use the ROCKER key to highlight "Beacon" and press ENTER. Use the ROCKER key to select "Scan" or "User" and press ENTER. If "Scan" is selected, the GPSMap 60 will automatically direct the beacon receiver to scan for available beacon transmitters. If "User" is selected, select the "Freq" and "Bit Rate" fields and enter the appropriate settings. The beacon status, signal-to-noise ratio and distance to beacon are displayed in the bottom of the page. GPSmap 60 GPS Navigation Interface Setup Data Format Page for GARMIN DGPS Data Format Page for RTCM In/NMEA Out Data Format Page for: NMEA In/NMEA Out Text Out RTCM In RTCM In/Text Out IMPORTANT NOTE: When the USB cable is connected to the GPS map 60, it is automatically detected and communicates only in Garmin Format. When the USB is connected, Garmin format will not communicate through the Serial connection, while all other formats can be used by the Serial connection with the USB still connected. 47