Garmin Map 60 Owner's Manual - Page 89
Interface Wiring Diagram - gpsmap 60 manuals
UPC - 689076190107
View all Garmin Map 60 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
Interface formats are selected from the Interface Setup on page 46 of this manual. The input/output lines on your GPSmap 60 are RS-232 compatible, allowing easy interface to a wide range of external devices, including PC's, differential beacon receivers, marine autopilots and /or a second GPS receiver. The NMEA 0183 version 3.01 interface format is supported by the GPSmap 60 and enables the unit to drive up to three NMEA devices. NMEA 0183 Version 3.01 Approved Sentences: GPGGA, GPGLL, GPGSA, GPGSV, GPRMB, GPRMC, GPRTE, GPVTG, GPWPL, GPBOD Garmin Proprietary Sentences: PGRME (estimated error), PGRMM (datum string), PGRMZ (altitude), PSLIB (beacon receiver control) DGPS (Differential GPS) corrections are accepted in RTCM SC-104 version 2.0 format through the 'Data In' line. The Garmin GBR 21 is the recommended beacon receiver for use with the GPSmap 60. Other beacon receivers with the correct RTCM format may be used, but may not correctly display status or allow tuning control from the GPS unit. The USB Interface Cable provided with this unit allows you to connect your GPSmap 60 to a PC-compatible computer's USB port. GPSmap 60 Appendices Interface Wiring Diagram (-) Ground Data In Data Out (+) Power Unit Power/Data Port View 79