Gateway DX4320 Hardware Installation Guide - Page 5
Preparing for Installation - manual
View all Gateway DX4320 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
1 Preparing for Installation This guide provides the information you need to install a replacement or new hard drive. This guide covers SCSI and IDE hard drives. Installing a hard drive is a process consisting of seven procedures that must be done in sequence: 1 Prepare for installation. 2 Remove an existing drive (if applicable). 3 Set the jumpers on the new drive (if applicable). 4 Install the new drive. 5 Set up the new drive. 6 Partition the new drive (manual setup). 7 Format the new drive (manual setup). 1
1
1
Preparing for
Installation
This guide provides the information you need to install a
replacement or new hard drive. This guide covers SCSI and
IDE hard drives.
Installing a hard drive is a process consisting of seven
procedures that must be done in sequence:
1
Prepare for installation.
2
Remove an existing drive (if applicable).
3
Set the jumpers on the new drive (if applicable).
4
Install the new drive.
5
Set up the new drive.
6
Partition the new drive (manual setup).
7
Format the new drive (manual setup).