HP 4200n HP LaserJet 4200 and 4300 series printer - User Guide - Page 160
PCL submenu, value for each setting is the one with an asterisk * next to it. - laserjet offline
UPC - 808736313971
View all HP 4200n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 160 highlights
Item MANUAL FEED Values *OFF ON COURIER FONT *REGULAR DARK WIDE A4 *NO YES PRINT PS ERRORS *OFF ON Explanation Feeds the paper manually from tray 1, rather than automatically from a tray. If MANUAL FEED=ON and tray 1 is empty, the printer goes offline when it receives a print job. MANUALLY FEED [PAPER SIZE] appears on the printer control panel display. Selects the version of Courier font to use: REGULAR: The internal Courier font available on the HP LaserJet 4 series printers. DARK: The internal Courier font available on the HP LaserJet III series printers. Changes the number of characters that can be printed on a single line of A4-size paper. NO: Up to 78 10-pitch characters can be printed on one line. YES: Up to 80 10-pitch characters can be printed on one line. Determines whether a PS error page prints or not. OFF: PS error page never prints. ON: PS error page prints when PS errors occur. PCL submenu The section that follows lists the settings and possible values. In the Values column, the default value for each setting is the one with an asterisk (*) next to it. Item FORM LENGTH ORIENTATION FONT SOURCE FONT NUMBER FONT PITCH FONT POINT SIZE SYMBOL SET Values Explanation 5 to 128 (*60) Sets vertical spacing from 5 to 128 lines for default paper size. *PORTRAIT LANDSCAPE Allows you to select default page orientation. Note It is best to set the page orientation in the program or printer driver. (Program and printer driver settings override control panel settings.) *INTERNAL SOFT SLOT 1, 2, or 3 INTERNAL: Internal fonts. SOFT: Permanent soft fonts. This option is available only if it is installed. SLOT 1, 2, or 3: Fonts stored in one of the three DIMM slots. This option is available only if it is installed. *0 to 999 The printer assigns a number to each font and lists the numbers on the PCL Font List. The font number appears in the Font # column of the printout. 0.44 to 99.99 (*10.00) Selects the font pitch. This item might not appear, depending on the font selected. 4.00 to 999.75 (*12.00) Selects the font point size. This appears only if a font with a scalable point size is selected as the default font. *PC-8 Several Selects any one of several available symbol sets at the printer control panel. A symbol set is a unique grouping of all the characters in a font. PC-8 or PC-850 is recommended for line-draw characters. 158 Appendix A Control panel menus ENWW