HP 4200n HP LaserJet 4200 and 4300 series printer - User Guide - Page 92

Running the cleaning page automatically Using the procedure below, you can set the printer to print cleaning pages automatically at an interval that you select. In order for the cleaning page to run without intervention, you must keep the selected size and plain paper type available in the printer. The printer will not interrupt a printing job in process. If you have an optional duplexer installed, make sure that automatic cleaning is turned off. Run cleaning pages manually only. (See "Running the cleaning page manually" on page 89.) To run the cleaning page automatically 1 Press SELECT ( ) to open the menus. 2 Use UP ARROW ( ) or DOWN ARROW ( ) to scroll to CONFIGURE DEVICE, and then press SELECT ( ). 3 Use UP ARROW ( ) or DOWN ARROW ( ) to scroll to PRINT QUALITY, and then press SELECT ( ). 4 Use UP ARROW ( ) or DOWN ARROW ( ) to scroll to AUTO CLEANING, and then press SELECT ( ). 5 Use UP ARROW ( ) or DOWN ARROW ( ) to scroll to ON, and then press SELECT ( ). 6 Use UP ARROW ( ) or DOWN ARROW ( ) to scroll to CLEANING INTERVAL, and then press SELECT ( ). 7 Use UP ARROW ( ) or DOWN ARROW ( ) to scroll to the desired interval between 1,000 and 20,000 pages, and then press SELECT ( ) to save your selection. 8 Use UP ARROW ( ) or DOWN ARROW ( ) to scroll to AUTO CLEANING SIZE, and then press SELECT ( ). 9 Use UP ARROW ( ) or DOWN ARROW ( ) to scroll to the paper size that you want the printer to use for cleaning pages (A4 or LETTER), and then press SELECT ( ) to save your selection. The printer automatically prints a cleaning page at the interval and page size that you selected. You can discard the output page created by the cleaning process. 90 3 Managing and maintaining the printer ENWW