HP 4200n HP LaserJet 4200 and 4300 series printer - User Guide - Page 47

1 2 3 4 5 6 ENWW Loading an optional 1,500-sheet tray The optional 1,500 sheet tray adjusts for letter, A4, and legal sizes. The printer automatically senses which size is loaded if the tray guides are properly adjusted. If an optional stapler/stacker is installed, the printer automatically rotates the printed images 180° on all paper sizes, even if the job is not stapled. If you are printing on paper that requires a specific orientation (such as letterhead, preprinted paper, prepunched paper, and paper with watermarks), make sure that the paper is loaded correctly in the tray. (See "Orientation of paper when a stapler is installed" on page 38.) CAUTION To avoid paper jams, do not load trays while the printer is printing. To load an optional 1,500-sheet tray 1 Open the door of the 1,500-sheet tray. 2 If there is paper in the tray, remove it. The guides cannot be adjusted in the next step, when paper is in the tray. 3 Pinch the guides at the front of the tray and slide them to the correct paper size. 4 Load paper with the front side facing down and the top edge toward the front of the tray. CAUTION Do not fan the paper. Fanning can cause misfeeds. 5 Make sure that the height of the stack does not exceed the maximum-height indicators on the guides and that the front edge of the stack is aligned with the arrows. 6 Close the door on the tray. Loading trays 45