HP Cisco Nexus 5000 Cisco MDS 9000 Family CLI Configuration Guide - Release 4. - Page 102

About Flash Devices Chapter 2 Before You Begin Send documentation comments to [email protected] • You can define command aliases for commands in any configuration submode or the EXEC mode. Defining Command Aliases You can define command aliases using the cli alias name command in configuration mode. This following example shows how to define command aliases: switch# config t switch(config)# cli alias name gigint interface gigabitethernet switch(config)# cli alias name shintbr show interface brief switch(config)# cli alias name shfcintup "shintbr| include up | include fc" You can display the command aliases defined on the switch using the alias default command alias. The following example shows how to display the command aliases defined on the switch: switch# alias CLI alias commands alias :show cli alias gigint :interface gigabitethernet shintbr :show interface brief shfcintup :shintbr | include up | include fc About Flash Devices Every switch in the Cisco MDS 9000 Family contains one internal bootflash (see Figure 2-2). The Cisco MDS 9500 Series additionally contains one external CompactFlash called slot0 (see Figure 2-2 and Figure 2-3). Figure 2-2 Flash Devices in the Cisco MDS 9000 Supervisor Module Internal bootflash Cisco MDS 9200 Series Switch Internal bootflash External CompactFlash Slot 0 Cisco MDS 9500 Series Director 120501 Figure 2-3 External CompactFlash in the Cisco MDS 9000 Supervisor Module CompactFlash 1 CompactFlash 1 eject button slot 0 85603 CompactFlash 1 LED 2-24 Cisco MDS 9000 Family CLI Configuration Guide OL-18084-01, Cisco MDS NX-OS Release 4.x