HP Cisco Nexus 5000 Cisco MDS 9000 Family CLI Configuration Guide - Release 4. - Page 105

Chapter 2 Before You Begin Using Switch File Systems Send documentation comments to [email protected] • Saving Command Output to a File, page 2-32 • Compressing and Uncompressing Files, page 2-32 • Displaying the Last Lines in a File, page 2-33 Specifying File Systems The syntax for specifying a file system is scheme:[//server/]. Table 2-4 describes the file system syntax components. Table 2-4 File System Syntax Components Scheme bootflash slot0 usb1 usb2 volatile nvram log Server sup-active sup-local sup-1 sup-standby sup-remote sup-2 module-5 module-6 module-7 module-8 - - - - - - Description Internal CompactFlash memory located on the active supervisor used for storing system images, configuration files, and other miscellaneous files. Internal CompactFlash memory located on the standby supervisor used for storing system images, configuration files, and other miscellaneous files. Internal CompactFlash memory located on slot0 or usb1 or usb2 of the active or standby supervisor in Cisco MDS 9506 and Cisco MDS 9509 switches. Internal CompactFlash memory located on slot0 or usb1 or usb2 of the active or standby supervisor in Cisco MDS 9513 Directors. External CompactFlash installed in a supervisor module used for storing system images, configuration files, and other miscellaneous files External CompactFlash installed in the usb1 slot. External CompactFlash installed in the usb2 slot. Volatile random-access memory (VRAM) located on a supervisor module used for temporary or pending changes Nonvolatile random-access memory (NVRAM) located on a supervisor module used for storing the startup-config file Memory on the active supervisor that stores logging file statistics OL-18084-01, Cisco MDS NX-OS Release 4.x Cisco MDS 9000 Family CLI Configuration Guide 2-27