HP Cisco Nexus 5000 Cisco MDS 9000 Family CLI Configuration Guide - Release 4. - Page 136

About On-Demand Port Activation Licensing Chapter 4 On-Demand Port Activation Licensing Send documentation comments to [email protected] Port-Naming Conventions Table 4-1 describes the port-naming conventions for the four Cisco Fabric switches. Table 4-1 Port-Naming Conventions for Cisco Fabric Switches Cisco MDS 9124 Switch Cisco MDS 9134 Switch Cisco Fabric Switch for HP Cisco Fabric Switch for c-Class BladeSystem IBM BladeCenter fc1/1 through fc1/24 fc1/1 through fc1/34 Internal ports: bay1 through bay16 Internal ports: bay1 through bay14 External ports: ext1 through ext8 External ports: ext0 and ext15 through ext19 Port Licensing On the Cisco MDS 9124 Switch, the first eight ports are licensed by default. You are not required to perform any tasks beyond the default configuration unless you prefer to immediately activate additional ports, make ports ineligible, or move port licenses. Figure 4-1 shows the ports that are licensed by default for the Cisco MDS 9124 Switch. Figure 4-1 Cisco MDS 9124 Switch Default Port Licenses (fc1/1 - fc1/8) If you need additional connectivity, you can activate additional ports in 8-port increments with each on-demand port activation license, up to a total of 24 ports. On the Cisco MDS 9134 Switch, the first 24 ports that can operate at 1 Gbps, 2 Gbps, or 4 Gbps are licensed by default. If you need additional connectivity, you can activate the remaining eight ports with one on-demand port activation license. A separate 10G license file is required to activate the remaining two 10-Gbps ports. Figure 4-2 shows the ports that are licensed by default for the Cisco MDS 9134 Switch. Figure 4-2 Cisco MDS 9134 Switch Default Port Licenses (fc1/1 - fc1/24) Figure 4-3 shows the external ports that are licensed by default for the Cisco Fabric Switch for HP c-Class BladeSystem. 159831 184089 Cisco MDS 9000 Family CLI Configuration Guide 4-2 OL-18084-01, Cisco MDS NX-OS Release 4.x