HP Cisco Nexus 5000 Cisco MDS 9000 Family CLI Configuration Guide - Release 4. - Page 786

Configuring User Accounts Chapter 32 Configuring Users and Common Roles Send documentation comments to [email protected] Table 32-1 CLI Operation to SNMP Operation Mapping (continued) CLI Operation CLEAR EXEC SNMP Operation SET SET Example 32-5 shows the privileges and rules mapping CLI operations to SNMP operations for a role named my_role. Example 32-5 Displays CLI Operation to SNMP Operation Mapping switch# show role name my_role Role:my_role vsan policy:permit (default) Rule Type Command-type Feature 1. permit clear * 2. deny clear ntp 3. permit config * 4. deny config ntp 5. permit debug * 6. deny debug ntp 7. permit show * 8. deny show ntp 9. permit exec * Note Although CONFIG is denied for NTP in rule 4, rule 9 allows the SET to NTP MIB objects because EXEC also maps to the SNMP SET operation. Configuring User Accounts Every Cisco MDS 9000 Family switch user has the account information stored by the system. Your authentication information, user name, user password, password expiration date, and role membership are stored in your user profile. The tasks explained in this section enable you to create users and modify the profile of an existing user. These tasks are restricted to privileged users as determined by your administrator. This section includes the following topics: • About Users, page 32-11 • Characteristics of Strong Passwords, page 32-11 • Configuring Users, page 32-12 • Logging Out Users, page 32-13 • Displaying User Account Information, page 32-13 32-10 Cisco MDS 9000 Family CLI Configuration Guide OL-18084-01, Cisco MDS NX-OS Release 4.x