HP Dc5000 Troubleshooting Guide - Page 61

POST Error Messages Numeric Codes and Text Messages (Continued) Code/Message Probable Cause Recommended Action 201-Memory Error RAM failure. 1. Run Computer Setup or Windows utilities. 2. Ensure memory and continuity modules are installed correctly. 3. Verify proper memory module type. 4. Remove and replace the memory module(s) one at a time to isolate the faulty module. 5. Replace faulty memory module(s). 6. If the error persists after replacing memory modules, replace the system board. 202-Memory Type Mismatch Memory modules do not Replace memory modules with matched match each other. sets. 207-ECC Corrected Single Bit Errors in Memory Module Socket(s) y, y, ... Single Bit ECC error. 1. Verify proper memory module type. 2. Try another memory socket. 3. Replace memory module if problem persists. 212-Failed Processor Processor has failed to initialize. 1. Reseat the processor in its socket. 2. If the processor does not respond, replace it. 213-Incompatible Memory Module in Memory Socket(s) X, X, ... A memory module in memory socket identified in the error message is missing critical SPD information, or is incompatible with the chipset. 1. Verify proper memory module type. 2. Try another memory socket. 3. Replace DIMM with a module conforming to the SPD standard. 214-Memory Device Failure. Error code: XX, Memory Module Socket(s): XX A specific error has occurred in a memory device installed in the identified socket. 1. Verify proper memory module type. 2. Try another memory socket. 3. Replace memory module if problem persists. A-4 www.hp.com Troubleshooting Guide