HP Dc5000 Troubleshooting Guide - Page 64
Diskette in Drive A not, Cover Has Been
UPC - 829160313740
View all HP Dc5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
POST Error Messages Numeric Codes and Text Messages (Continued) Code/Message Probable Cause Recommended Action 602-Diskette Boot Record Error Diskette in Drive A not bootable. Replace the diskette. 605-Diskette Drive Type Error Mismatch in drive type. 1. Run Computer Setup. 2. Disconnect any other diskette controller devices (tape drives). 3. Clear CMOS. (See Appendix B, "Password Security and Resetting CMOS.") 610-External Storage Device Failure External tape drive not connected. Reinstall tape drive or press F1 and allow system to reconfigure without the drive. 611-Primary Floppy Port Address Assignment Conflict Configuration error. Run Computer Setup. 612-Secondary Floppy Port Address Assignment Conflict Configuration error. 1. Run Computer Setup. 2. Remove expansion cards. 3. Clear CMOS. (See Appendix B, "Password Security and Resetting CMOS.") 660-Display cache is detected unreliable Integrated graphics controller display cache is not working properly and will be disabled. Replace system board if minimal graphics degrading is an issue. 912-Computer Cover Has Been Removed Since Last System Startup Computer cover was removed since last system startup. No action required. 914-Hood Lock Coil is not Connected Smart Cover Lock mechanism is missing or not connected. 1. Reconnect or replace hood locking mechanism. 2. Reseat or replace hood locking mechanism cable. Troubleshooting Guide www.hp.com A-7