HP Photosmart Premium Fax All-in-One Printer - C309 Basics Guide - Page 66

Chapter 4 Troubleshooting and support 1 Telephone wall jack 2 Use the phone cord supplied in the box with the product 3 Telephone For more information on setting up the product with your telephone, see the printed documentation that came with the product. Cause: The telephone used to initiate the fax call was not connected directly to the product or was not connected properly. If this did not solve the issue, try the next solution. Solution 3: Start sending the fax within 3 seconds of hearing fax tones Solution: If you are sending a fax manually, make sure that you press Start Fax within three seconds of hearing the recipient's fax tones, otherwise the transmission might fail. Cause: You did not press Start Fax within three seconds of hearing fax tones. If this did not solve the issue, try the next solution. Solution 4: Lower the fax speed Solution: You might need to send and receive faxes at a slower rate. Try setting the Fax Speed to Medium (14400) or Slow (9600) if you use one of the following: • An Internet phone service • A PBX system • Fax over Internet Protocol (FoIP) • An ISDN service To set the fax speed from the control panel 1. Press Setup. 2. Press the down arrow button to highlight Advanced Fax Setup, and then press OK. 3. Press the down arrow button to highlight Fax Speed, and then press OK. 4. Press the down arrow button to select one of the following settings, and then press OK. 64 Troubleshooting and support