HP StorageWorks 1606 HP StorageWorks FOS 6.3.0b Release Notes (5697-0360, Apri - Page 20

• M-EOS-based platforms must operate with M-EOS 9.8.1 or later for McDATA Fabric Mode (interopmode 2), or M-EOS 9.9.0 or later for Open Fabric Mode (interopmode 3). WebTools compatibility • FOS 6.3 is supported with JRE 1.6.0 Update 13. • If the JRE 1.6.0 version is not Update 13, the DCFM server/client and B-series Element Manager (WebTools) crashes on launch. • WebTools tunnel and TCP graphs support tool tips only for the first enabled TCP connection graph. FOS feature compatibility in native connectivity modes Some FOS features are not fully supported when operating in the native connectivity modes for deployment with M-EOS-based products. All HP StorageWorks models supported by FOS 6.3.0x support both interopmodes 2 and 3, with the exception of the 4/32 SAN Switch, 2408 FCoE Converged Network Switch, and DC SAN Backbone Director or DC04 SAN Director with one or more DC SAN Director Switch 10/24 FCoE Blades. NOTE: HP may not support all of these switches in this mode. For information about support in interopmodes 2 and 3, see HP StorageWorks Merging Fabrics Based on M-Series and B-Series Fibre Channel Switches Application Notes, available at http://www.hp.com. Table 5 specifies FOS feature support when operating in either interopmode 2 (McDATA Fabric Mode) or interopmode 3 (Open Fabric Mode) with FOS 6.3.0b. Table 5 Feature support in interopmodes 2 and 3 FOS features (supported in interopmode 0) FOS 6.3.0b IM = interopmode IM 2 IM 3 L2 FOS Hot Code Load Yes Yes FOS Hot Code Load with FCR Yes Yes Zone Activation Support Traffic Isolation Zones1 Yes Yes11 Yes No Frame Redirection (devices attached to FOS)1 Yes Yes11 Frame Redirection (devices attached to M-EOS)1 Yes Yes11 Frame Redirection over FCR10 Yes Yes11 FCR Fabric Binding (route to M-EOS fabric with Fabric Binding)9 Yes Yes L2 Fabric Binding Yes No* DCC policies No No SCC policies Yes4 No* 20