HP StorageWorks 1606 HP StorageWorks FOS 6.3.0b Release Notes (5697-0360, Apri - Page 67
Unable to clear Port Name from screen Edit CUP Port Connectivity
View all HP StorageWorks 1606 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Command "portcfgdefault " performed on an internal Fport will convert that Fport into an NPort. Fixed in FOS 6.3.0 Workaround prior to code change: When the system is working well, save that configuration somewhere so that it can be reapplied instead of relying on portcfgdefault. Fixed in FOS 6.3.0 EE monitor counter is not incrementing after firmware upgrade to 6.2.0. Workaround prior to code change: Delete and re-install EE Monitors. ISL monitor total transmit and number of destination domains monitored Fixed in FOS 6.3.0 counters show 0 when traffic is running thru this ISL. SNMP: The swNs Table does not list all the name server entries. Fixed in FOS 6.3.0 Interopmode 2 - Value other than 0 or 1 in configdownload file will enable default zone; I was expecting an error message. IP monitor shows number of SCSI frames after deleting a SCSI filter monitor and adding IP monitor on the same port. Onboard Administrator used to manage 8Gb SAN Switch for BladeSystem c-Class is not able to read the switchname. Fixed in FOS 6.3.0 Fixed in FOS 6.3.0 Fixed in FOS 6.3.0 Workaround prior to code change: Switch name can be displayed from FOS CLI command - switchname. Statsclear does not clear porterrshow statistic data for field "link fail " Fixed in FOS 6.3.0 on 6-port 10Gb/s ISL blade. "Cyptocfg --show -tapepool -all -stat" returns "Operation failed:" the first time it's issued but displays valid output when immediately re-issued. Fixed in FOS 6.3.0 Workaround prior to code change: Re-issue the CLI. With virtual fabric enabled, when no EE is present, cryptocfg show localEE returns "EE detection aborted: IPC Failure". A LUN with encryption mode: cleartext and encryption format: Brcd Native, fails to read DF_Compatible tape media. Fixed in FOS 6.3.0 Fixed in FOS 6.3.0 Workaround prior to code change: Configure the LUN with encryption mode:encrypt & encryption format:DF_Compatible and restore the files from the tape media. After repeatedly deleting and adding partitions, creating a new partition resulted in an ASSERT at "file = .../bccb/lib/utils/register.c, line Fixed in FOS 6.3.0 = 115, user mode" and termination of ficud. SR Request for IBM PMH 85437,000,738 - HK Monetary. Fixed in FOS 6.3.0 Unable to clear Port Name from screen " Edit CUP Port Connectivity Configuration." SNMP changes required to better support snmp mib. Fixed in FOS 6.3.0 Fixed in FOS 6.3.0 HP StorageWorks FOS 6.3.0b Release Notes 67