HP StorageWorks 1606 HP StorageWorks FOS 6.3.0b Release Notes (5697-0360, Apri - Page 65
only 2047 Zones per Zone Set., of DC SAN Director.
View all HP StorageWorks 1606 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Switchshow lines for FCoE ports should always be in short format. Fixed in FOS 6.3.0 If user selects authentication type as "all", in interop modes the default authentication type is still FCAP between FOS switches. Fixed in FOS 6.3.0 Workaround prior to code change: .csv file related changes are checked-in by the CLI gatekeeper. so resolving this TR. Fabric watch is allows setting of the Traits and Alarm configuration Fixed in FOS 6.3.0 even when no alarms are available for all of the classes in WebTools. The 'swFCPortTable' displays the port statistical data for the logical port. Fixed in FOS 6.3.0 Encryption blade turns faulty 21 after firmwaredownload and reboot of DC SAN Director. Fixed in FOS 6.3.0 Workaround prior to code change: Slotpoweroff/slotpoweron the blade or remove the blade and insert back. Create 2 access-list with 170 rules in each ACL and apply on 2 ports. Fixed in FOS 6.3.0 Statistics is not updated for one of the ACL. MAC access-group is not removed even after executing no mac access- Fixed in FOS 6.3.0 group in the interface mode. In interop mode 2, with Default Zone enabled, the user can activate only 2047 Zones per Zone Set. Fixed in FOS 6.3.0 Event for change in IDID state on neighboring switch not being posted Fixed in FOS 6.3.0 to log. In connUnitLinkTable,for the attribute connUnitLinkConnIdY there is a Fixed in FOS 6.3.0 mismatch between the PID displayed on the CLI and browser. Backport code to address various SNMP related issues. Fixed in FOS 6.3.0 User might observe a Name server related verify on console after firmware download followed by power cycle on the 4/256 SAN Director. Fixed in FOS 6.3.0 Using WebTools's HA tab, synchronize button and details button do not work as expected. Fixed in FOS 6.3.0 Workaround prior to code change: Use "hasyncstart" from CLI. Public/Private keys are not copied during HA failover. Fixed in FOS 6.3.0 Workaround prior to code change: Use SCP with passwords or if password-less SCP is to be used, generate a key pair for SSH outgoing authentication from the switch or: The workaround was to do the following: hadisable sshutil delprivkey sshutil delpubkeys haenable. Occasionally, after a firmwaredownload or an HA failover on a chassis system, users will notice a message on standby CP console: "cannot Fixed in FOS 6.3.0 create symbolic link '/etc/localtime' to '/usr/share/zoneinfo/..." HP StorageWorks FOS 6.3.0b Release Notes 65