JVC GY-DV5000U GY-DV5000U 3-CCD Professional DV Camcorder 92 page instruction - Page 14

2. CONTROLS, INDICATORS AND CONNECTORS 2-6 Indications on the LCD Monitor and in the Viewfinder (Cont'd) No. Item 5 Time/Date indication 6 Audio sampling frequency indication 7 Audio level meter indication 8 VTR mode indication 9 Event display Contents Recorded data are displayed during playback, fast forward, and rewind. During recording, the data from the DV connector is displayed. In the stop mode, the current data is displayed. Whether or not the date and time should be displayed and the display style are set on the TIME/DATE menu screen. When the date and time have not been set, the following indication appears. The audio sampling frequency used for the recording is displayed during playback. (32 K, 48 K, 44.1 K) Displays the audio level meters during playback. Whether or not to display this item is set with the AUDIO item on the LCD/ VF (2/2) menu screen. Indicates the VTR operation status [STBY, STOP, PLAY, REC, FF, REW, FWD, REV, STL, BSRH, - - - (No tape loaded) BLANK SEARCH : Indicates that blank search operation is in progress. ■ Magnified Status Indications on the LCD Monitor The characters on the status screens can be showed alone in magnified size on the LCD monitor. 1 EDITSEARCH FILTER 1 3200K 2 5600K 1/8 ND .3 5600K .4 5600K 1/64 ND SHUTTER STATUS MONITOR MENU AUTO IRIS FULL AUTO BACK L NORMAL SPOT L BLACK LOLUX STRETCH NORMAL COMPRESS MODE VTR CAM POWER VTR ON OFF OPEN CH-1 AUDIO LEVEL CH-2 LCD BRIGHT FRONT REAR CH-1 CH-2 AUDIO INPUT AUDIO SELECT CH-1 CH-2 AUTO MANUAL DISPLAY PULL OPEN CH1 48k L - ∞ 40 30 CH2 20 10 OVER 0 dB OVER FRNEDEFTC12H34M34S10F PLAY 2 SP 213min 3 e 10.9V DISPLAY button ■ When the DISPLAY button is pressed while the Status (0, 1, 2, 3) screen is shown in the Camera mode, or a status screen is shown in the VTR mode, the displayed contents change every time the DISPLAY button is pressed. Only image displayed → Characters shown enlarged ↑ Image and characters displayed ← No. Item 1 Audio Lock Indicator 2 Time Code Generator Setting Indicator 3 Drop/Non-drop Indicator (U model) Contents Displayed during recording and playback when the audio signal is locked to the video signal. Indicates the set status of the TC GENE switch on the side section. FREE : TC GENE switch is set to PRESET-FREE RUN MODE. RECR : TC GENE switch is set to PRESET-REC RUN MODE. REGN : TC GENE switch is set to REGEN MODE. Displayed during playback of a tape recorded in drop frame or non-drop frame mode. DF : During playback of a tape recorded in drop frame mode. NDF : During playback of a tape recorded in non-drop frame mode. 24 2. CONTROLS, INDICATORS AND CONNECTORS ■ Alarm Message Display Alarm display area FAS -3dB Alarm display area FAW I SD B 12.2V 01/02/03 AM01:23:45 ● The following alarm messages are displayed while the Status(0, 1, 3) screen is shown in the Camera mode, or a status screen is shown in the VTR mode. If an alarm is generated while the Status 2 screen is shown, the Status 0 screen returns to display the alarm. ● When an abnormality occurs in the VTR, a warning message with an error code is displayed. Alarm Indication PAL INHIBIT REC INHIBIT COPY INHIBIT LOW VOLTAGE TAPE NEAR END TAPE END INVALID TAPE! LP TAPE INVALID! NO TAPE! NO DV SIGNAL! COPY GUARD! CLEANING TAPE! HEAD CLEANING REQUIRED! CLOSE CASSETTE COVER! OPEN CASSETTE COVER! VCR WARNING (Error code) (Example) 7001 DRUM MOTOR FAILURE Contents Displayed when attempt is made to play back a tape recorded with PAL signal. Displayed when an unrecordable videocassette (the switch on the back of the cassette is set to "SAVE") is loaded. Displayed when attempt is made to record a copy-guarded signal. Displayed when remaining battery power becomes low. Flashes when the remaining tape is 3 minutes or less in the shooting mode. It is not shown in the playback mode. Displayed when the tape has reached its end. Displayed when a data tape for PC use or DVC PRO cassette is used. The tape is ejected. Displayed when attempt is made to playback a tape recorded in the LP mode. Displayed when no videocassette is inserted and the VTR trigger button is pressed. Displayed when there is no input to the DV connector and recording is attempted. Displayed when attempt is made to play back a copy-guarded tape. Displayed when a head cleaning tape is inserted. Displayed when head is clogged. Head cleaning is necessary. Displayed when operation is attempted while the cassette cover is open. Displayed when the cassette cover is closed during the eject operation. Displayed in case abnormalities occur in the VCR, or when condensation occurs in the unit. For details, ☞ see page 88. 25