JVC GY-DV5000U GY-DV5000U 3-CCD Professional DV Camcorder 92 page instruction - Page 40

11. MENU SCREENS 11-12 TIME/DATE Menu Screen Item DISPLAY Function Variation Range Initial Setting Sets whether the date and time are shown in the status display on the LCD monitor or in the viewfinder. OFF: Not displayed. ON : Displayed. When a tape with time and date not recorded is played back, there will be no display of time and date even when this item is set to ON. OFF ON OFF DISPLAY MODE In the Camera mode, the date and time are displayed in accordance with the following settings. In the VTR mode, the date and time are always displayed. BARS+CAM : Date and time are always displayed. BARS: Date and time are displayed when the OUTPUT switch on the side section is set to BARS. CAM: Date and time are displayed when the OUTPUT switch on the side section is set to CAM. When the DISPLAY item is set to OFF, "- - -" is indicated and this item cannot be selected. BARS+CAM BARS CAM BARS+CAM DATE REC Selects whether date and time are to be recorded on the tape as video data or not, as well as the video mode in case of recording. Recording is done according to the set position of the OUTPUT switch at the side panel. OFF : Date and time data are not recorded. BARS : Date and time data are recorded when color bars are output. BARS+CAM: Date and time data are recorded when color bars and camera image are output. When the DISPLAY item is set to OFF, "- - -" is indicated and this item cannot be selected. With setting to BARS or BARS+CAM, the screen size is fixed to 4:3. OFF BARS BARS+CAM OFF DISPLAY STYLE Selects the style for the date and time display. DATE+TIME: Date and time are displayed. DATE: Date only is displayed. TIME: Time only is displayed. When the DISPLAY item is set to OFF, "- - -" is indicated and this item cannot be selected. DATE+TIME DATE TIME DATE+TIME DATE STYLE Selects the style for the date display. YY/MM/DD: Displayed in the format of year/month/date. MM/DD/YY: Displayed in the format of month/date/year. DD/MM/YY: Displayed in the format of date/month/year. When the DISPLAY item is set to OFF, "-" is indicated and this item cannot be selected. YY/MM/DD MM/DD/YY DD/MM/YY MM/DD/YY TIME STYLE Selects the style for the time display. 24 HOUR: Displays the time using the 24-hour system. 12 HOUR: Displays the time using the 12-hour system. When the DISPLAY item is set to OFF, "- - -" is indicated and this item cannot be selected. 24 HOUR 12 HOUR 24 HOUR SEC DISPLAY Selects whether to display the seconds in the time display. OFF ON OFF: Seconds are not displayed. ON ON : Seconds are displayed. When the DISPLAY item is set to OFF, "- - -" is indicated and this item cannot be selected. CLOCK ADJUST To adjust the date and time, align the cursor with this position and then press the SHUTTER dial. The date and time are set on the CLOCK ADJUST screen. For the setting method, see "Setting, Displaying and Recording the Date and Time" on page 41. ----- ----- PAGE BACK The TC/UB/CLOCK menu returns when the SHUTTER dial is pressed while the cursor is at this position. ----- ----- 76 11. MENU SCREENS 11-13 OTHERS Menu Screen The OTHERS menu screen consists of two screens (1/2 screen, 2/2 screen) ■ OTHERS (1/2) Menu Screen Item Function Variation Range Initial Setting OUTPUT CHAR. Selects whether characters should be displayed on the screen of a monitor connected to MONITOR OUT connector or Y/C OUT connector. OFF : No on-screen-display ON : On-screen-display OFF ON OFF NET REMOTE Set when the optional Network Pack KA-DV5000 is attached. Selects whether the GY-DV5000 should be controlled by an external signal input via the network pack. OFF : Not controlled. ON : Controlled. (Operation from the main unit is disabled.) OFF ON OFF DV REC Selects whether or not the VTR trigger command should be output through OFF ON TRIGGER the DV connector. Set to ON when the GY-DV5000's DV signal should be ON recorded on another component for backup. OFF : VTR trigger command is not output. ON : VTR trigger command is output. * Set this item to OFF, when the Backup Recording function of BR-DV600A or BR-DV3000 is used. LONG PAUSE TIME Selects the time (minutes) before the tape protect mode (drum head rotation stopped) is engaged when the record-standby condition continues. 3MIN : 3 minutes 30MIN: 30 minutes * When used in a cold environment or when the stopped or STILL status continues, the setting will be 3 minutes regardless of the setting on the menu. 3MIN 30MIN 30MIN REM FF/REW MODE Selects the operation when the FF or REW command is received when the GY-DV5000 is remote controlled using a non-linear editing controller. FF/REW : Fast forward or rewinding is executed. Normally, this setting is used. SEARCH : FWD search or REV search is executed. Use this setting when detection of the beginning of programs (cue-up) works less than satisfactorily when this item is set to FF/REW. FF/REW SEARCH FF/REW STEP SLOW MODE Selects the amount of frames advanced in the STILL mode. (Frame advance is only available with an external remote control signal.) FIELD : Field-by-field frame advance. FRAME : Frame-by-frame frame advance. FIELD FRAME FRAME NEXT PAGE To display the OTHERS (2/2) menu screen, align the cursor with this item and then press the SHUTTER dial. ----- ----- PAGE BACK The TOP MENU screen returns when the SHUTTER dial is pressed while the cursor is at this position. ----- ----- 77