JVC GY-DV5000U GY-DV5000U 3-CCD Professional DV Camcorder 92 page instruction - Page 30

7. SHOOTING OPERATION 7-5 Recording the Color Bars EDITSEARCH FILTER 1 3200K 2 5600K 1/8 ND .3 5600K .4 5600K 1/64 ND SHUTTER STATUS MONITOR MENU AUTO IRIS FULL AUTO BACK L NORMAL SPOT L BLACK LOLUX STRETCH NORMAL COMPRESS MODE VTR CAM POWER VTR ON OFF OPEN CH-1 AUDIO LEVEL CH-2 LCD BRIGHT FRONT REAR CH-1 CH-2 AUDIO INPUT AUDIO SELECT CH-1 CH-2 AUTO MANUAL DISPLAY PULL OPEN OUTPUT switch POWER VTR ON OFF Color bar signal of the built-in signal generator An SMPTE standard color bar is output. White Yellow Cyan Green Magenta Red Blue Blue Black Magenta Black Cyan Black White Black White Black Whether the camera image should be output or whether the color bar of the built-in signal generator should be output can be selected during record-standby and recording. ■ To output the color bar, set the OUTPUT switch to the BARS side. ■ To output the camera image, set the OUTPUT switch to the CAM AUTO KNEE ON/OFF side. MEMO: Whether or not the audio reference signal should be output while the color bar is output can be selected with the TEST TONE item on the AUDIO/VIDEO menu screen. (U model) An EBU standard colour bar is output. White Yellow Cyan Green Magenta Red Blue Black (E model) 56 8. PLAYBACK MODE 8-1 Playback Procedure Recorded pictures can be viewed in the viewfinder, or on the LCD monitor, or on the monitor connected to the video output connector. Operation cover EDITSEARCH FILTER 1 3200K 2 5600K 1/8 ND .3 5600K .4 5600K 1/64 ND SHUTTER STATUS MONITOR MENU AUTO IRIS FULL AUTO BACK L NORMAL SPOT L BLACK LOLUX STRETCH NORMAL COMPRESS MODE VTR CAM POWER VTR ON OFF OPEN CH-1 AUDIO LEVEL CH-2 LCD BRIGHT FRONT REAR CH-1 CH-2 AUDIO INPUT AUDIO SELECT CH-1 CH-2 AUTO MANUAL DISPLAY PULL OPEN BLANK SEARCH REW STOP FF PLAY STILL MODE VTR CAM Still button PLAY button STOP button POWER switch MODE switch MEMO: ● The GY-DV5000 can play back the following three types of videocassettes: • DV videocassette • MiniDV videocassette • DVCAM videocassette ● Tapes recorded in the LP mode cannot be played back. 1. Set the POWER switch to ON. 2. Set the unit to the VTR mode. Press the MODE switch upward to turn on the VTR indicator. ● Playback is also possible in the Camera mode. Playback operation becomes possible when the STOP button is pressed to set the VTR operation mode indicator to indicate STOP. 3. Load the recorded videocassette correctly. Slide the OPEN knob on the top section of the unit to open the cassette cover.Then insert the videocassette and close the cover. ● When the videocassette is loaded, the unit enters the Stop mode. 4. Open the operation cover on the upper section of the unit. Slide the operation cover to the side to open. 5. Press the PLAY button. ● Playback starts. 6. Press the STILL button to stop playback temporarily. ● The unit enters the still mode. 7. To re-start playback, press the PLAY button. 8. To stop playback or the still mode, press the STOP button. MEMO: ● In the VTR mode, the camera image is not output on the LCD monitor, in the viewfinder or through the video output connector. ● The VTR mode is indicated on the LCD monitor and in the viewfinder. (Status screen) TC00:00:00:00 20min PLAY 12.2V 01/02/03 AM--:--:-- VTR operation mode indication ● When the still picture mode or stop mode has continued for a while, the unit automatically switches to the tape protect mode. Tape protect mode: Drum rotation is stopped in order to protect the tape. ● Noise may appear in the picture in the still mode. ● When the automatic tracking function is activated at the start of the playback mode, digital noise may appear in the playback image. ● This unit does not allow manual tracking adjustment. ● When playing back a tape that was recorded on another unit, digital noise may appear during playback. ● Following loading of the tape, the built-in head cleaner will emit a sound while operating. This does not indicate a malfunction. ● The data recorded for the date and time or time code on the tape can be shown on the screen. To enable or disable the display is selected on the menu screen: Display of date and time: TIME/DATE menu screen Display of time code: LCD/VF (2/2) menu screen 57