Konica Minolta bizhub C552 bizhub C452/C552/C552DS/C652/C652DS Copy Operations - Page 104

5.4 Application 5 Settings Margin Position Image Shift Adjust Value Original Direction d Reference To set the zoom: Press [Basic] ö [Zoom]. Select an option from [Auto], [Left], [Top] and [Right]. When Auto is selected, the binding position is automatically set. • This function automatically determines the binding position according to the orientation of the loaded original. If the original length is 11-11/16 inch (297 mm) or less, a binding position along the long side of the paper is selected. If the original length is more than 11-11/16 inch (297 mm), a binding position along the short side of the paper is selected. • The binding position is set on the upper or left-side end. • Be sure to load the original so that its top side is placed in the back. If the document is loaded in any other orientation, this setting fails. Adjust the image position according to the binding margin. Change Back Shift Adjust the image position on the back side of the paper in the 2-sided copy mode. • North American model (inch): Configure the width of the binding margin (1/16 inch to 3/4 inch) with pressing [+] and [-]. When [None] is selected, the binding margin width is set to 0 inch. • European model (cm): Enter the width of the binding margin (0.1 mm 20.0 mm). When [None] is selected, the binding margin width is set to 0 mm. Select the orientation of the original loaded into the ADF or placed on the original glass. bizhub C652/C652DS/C552/C552DS/C452 5-38