Konica Minolta bizhub C552 bizhub C452/C552/C552DS/C652/C652DS Copy Operations - Page 166
Horizontal Punch (Z-Fold) Position Adjustment, 1st Z-Fold Position Adjustment
View all Konica Minolta bizhub C552 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 166 highlights
7.1 System Settings 7 Horizontal Punch (Z-Fold) Position Adjustment Adjust the horizontal position of the punched holes for each paper size. 0 Before making any adjustments, create a sample using the punch settings. Adjust the center staple position while checking the created sample. 0 This adjustment is available if the Z Folding Unit is installed. 1 Select [Utility/Counter] ö [Administrator Settings] ö [System Settings] ö [Expert Adjustment] ö [Finisher Adjustment] ö [Horizontal Punch (Z-Fold) Position Adjustment]. 2 Press [+] or [-] to adjust the punched hole position while checking the sample. 3 Press [OK]. 4 Create a sample, and check the print result. 1st Z-Fold Position Adjustment Adjust the first paper folding position for each paper size when using the Z-fold function. 1st Z-Fold Position 0 Before making any adjustments, create a sample using the Z-fold function. Adjust the center staple position while checking the created sample. 0 This adjustment is available if the Z Folding Unit is installed. 1 Select [Utility/Counter] ö [Administrator Settings] ö [System Settings] ö [Expert Adjustment] ö [Finisher Adjustment] ö [1st Z-Fold Position Adjustment]. 2 While checking the sample, press [+] or [-] to adjust the first folding position. 3 Press [OK]. 4 Create a sample, and check the print result. bizhub C652/C652DS/C552/C552DS/C452 7-18