Konica Minolta bizhub C552 bizhub C452/C552/C552DS/C652/C652DS Copy Operations - Page 159
bizhub C652DS/C552DS, Prior Detection Setting front - how to change power save
View all Konica Minolta bizhub C552 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 159 highlights
7.1 System Settings 7 Settings Paper Separation Adjustment Color Registration Adjust Gradation Adjustment Scanner Area ADF Adjustment Line Detection Trail Edge Adjust Image Stabilization Setting Specify the type and opportunity of image stabilization. If [Standard] is selected, normal stabilization is performed during warm-up processing when a change in the absolute humidity has been detected during warm-up processing. If [Color Priority] is selected, color stabilization is performed when the power has been turned on. Selecting [Black & White Priority] executes monochrome stabilization during warm-up when absolute humidity change is detected during the warmup, and then stabilizes color before performing color print. Adjust the paper position where the two sides are separated for 2-sided print. Correct color shifts if they are detected in the print result. For details, refer to page 7-20. Adjust irregular gradation levels of print images. For details, refer to page 7-21. Image Stabilization Only Stabilize the image by pressing the [Start] key before performing gradation adjustment. Print Adjust the gradation when the color gradation has been changed in a print image. This function performs adjustment, emphasizing the gradation expression of an image and the reproducibility of texts or lines. Copy Adjust the gradation when the color gradation has been changed in a print image. This function performs adjustment to save as many images as possible in memory. Adjust the scan range of the scanner. For details on displaying this item, contact your service representative. Make adjustments for scanning images in the ADF. For details on displaying this item, contact your service representative. Prior Detection Setting (bizhub C652/C552/C452) Configure whether to issue an alert when the slit glass is dirty. • Select an alert display format and contamination detection level. Prior Detection Setting (front) (bizhub C652DS/C552DS) Configure whether to issue an alert when the slit glass (front) is dirty. • Select an alert display format and contamination detection level. Prior Detection Setting (back) (bizhub C652DS/C552DS) Configure whether to issue an alert when the slit glass (back) is dirty. • Select an alert display format, con- tamination detection level and display timing. Feed Cleaning Settings Configure whether to remove a dirt on the slit glass each time one sheet of paper passes through the ADF when scanning an original using the ADF. Correct a shift if it is detected at the trailing edge of the print result. Place, 11 e 17 w, 8-1/2 e 11 v, A3 w, or A4 v on the bypass tray, and then press the [Start] key to print a test pattern. bizhub C652/C652DS/C552/C552DS/C452 7-11