Konica Minolta bizhub C552 bizhub C452/C552/C552DS/C652/C652DS Copy Operations - Page 162
Media Adjustment, Center Staple Position
View all Konica Minolta bizhub C552 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 162 highlights
7.1 System Settings 4 Check that the distance from the starting print position of the test pattern to the left edge of the paper (b) is 3.0 mm (+/-0.5 mm). % Press [+] or [-] to adjust the width. Press the [Start] key to print a test pattern. 5 Press [OK]. 7 b b:3.0mm±0.5mm Media Adjustment Adjust defective print images caused by paper type features. 1 Press the [Utility/Counter] key ö [Administrator Settings] ö [System Settings] ö [Expert Adjustment] ö [Printer Adjustment] ö [Media Adjustment]. 2 Select a paper type to be adjusted. % If defective images exist on the back side of 2-sided copy paper, select [2nd Side]. 3 Press [+] or [-] to specify an adjusted value. % If missing parts or white spots exist in print images, press [-]. If the surface of the print image is rough, press [+]. 4 Press [OK] ö [Close]. 5 Copy, and then check the print image. Center Staple Position Adjust the stapling position for each paper size when printing with the center staple function. 0 Adjust the half-fold position before adjusting the center stapling position. 0 Before making any adjustments, create a sample using the center staple function. Adjust the center staple position while checking the created sample. 0 It can be adjusted only when the saddle sticher is installed. 0 When stapling in parallel with the left edge of paper, contact your service representative. 1 Press the [Utility/Counter] key ö [Administrator Settings] ö [System Settings] ö [Expert Adjustment] ö [Finisher Adjustment] ö [Center Staple Position]. 2 Select the size of paper of which the center staple position is adjusted. 3 Press [+] or [-] to adjust the staple position while checking the sample. 4 Press [OK]. 5 Create a sample, and check the print result. bizhub C652/C652DS/C552/C552DS/C452 7-14