Konica Minolta bizhub C552 bizhub C452/C552/C552DS/C652/C652DS Copy Operations - Page 167
nd Z-Fold Position Adjustment, Punch Unit Size Detect Sensor
View all Konica Minolta bizhub C552 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 167 highlights
7.1 System Settings 7 2nd Z-Fold Position Adjustment Adjust the second paper folding position for each paper size when using the Z-fold function. 2nd Z-Fold Position 0 Before making any adjustments, create a sample using the Z-fold function. Adjust the center staple position while checking the created sample. 0 This adjustment is available if the Z Folding Unit is installed. 1 Select [Utility/Counter] ö [Administrator Settings] ö [System Settings] ö [Expert Adjustment] ö [Finisher Adjustment] ö [2nd Z-Fold Position Adjustment]. 2 While checking the sample, press [+] or [-] to adjust the second folding position. % The distance between the left end of paper and the second Z-fold position must be 2 mm or more. 2 mm or more 3 Press [OK]. 4 Create a sample, and check the print result. Punch Unit Size Detect Sensor If the punch position is displaced depending on the paper tray, the punch unit is automatically adjusted. 0 This adjustment is available if the Z Folding Unit or Punch Kit PK-516 is installed. 1 Select [Utility/Counter] ö [Administrator Settings] ö [System Settings] ö [Expert Adjustment] ö [Finisher Adjustment] ö [Punch Unit Size Detect Sensor]. 2 Press [Start]. % The punch unit edge sensor is automatically adjusted. % The adjusted result appears. bizhub C652/C652DS/C552/C552DS/C452 7-19