Kyocera ECOSYS FS-1135MFP FS-1135MFP Fax Operation Guide - Page 30
Automatic Send, Switching to the Send Screen, Selection of Transmission Method, Setting for Direct
View all Kyocera ECOSYS FS-1135MFP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
FAX Operation (Basic) Automatic Send General transmission using the numeric keys is explained. Switching to the Send Screen Ready to send. 2011/05/25 12:30 Text+Photo 200x100dpi [Orig.Img] [FAX Res.] 1 Press the FAX key. Check that the basic send screen is displayed. NOTE: Depending on the settings, the Address Book screen may appear. In this event, press Reset to display the basic screen for sending. In addition to fax, you can include e-mail transmission and/or folder (SMB/FTP) transmission in a single transmission job (Multi Sending). Press the Send key to select the destinations. For details, refer to Sending in the Operation Guide for the machine. Selection of Transmission Method 2 There are two transmission methods - memory transmission and direct transmission. The default is memory transmission. To select direct transmission, use the following procedure. 1 Press the Function Menu key. 2 Press the or key to select [FAX Direct TX]. 3 Press the OK key. 4 Press the or key to select [On]. 5 Press the OK key. Setting for Direct transmission Off On Description Starts memory transmission. After originals are scanned into memory, the communication starts. Starts direct transmission. Dials the receiving system, and after the communication has started, originals are scanned. NOTE: In direct transmission, you can designate only one destination for one transmission. 3-2