Kyocera ECOSYS FS-1135MFP FS-1135MFP Fax Operation Guide - Page 39
Cancelling Communication, Cancelling Memory Transmission (while originals are being scanned)
View all Kyocera ECOSYS FS-1135MFP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
FAX Operation (Basic) Cancelling Communication The method for cancelling communication with this machine differs depending on the transmission method (memory transmission or direct transmission) and communication form. Methods of cancelling in various cases are explained here. Cancelling Memory Transmission (while originals are being scanned) 3 During memory transmission, to cancel scanning of originals, press the Stop key on the operation panel. Scanning of originals is canceled, and the originals are ejected. When originals remain in the document processor, take them out from the original output table. Cancelling Memory Transmission (during communication) During memory transmission, to cancel communication after it has started following the completed scanning of originals, use the following procedure. NOTE: If user management is set to On, the administrator or the user who performs the memory transmission can be canceled the job. You can cancel transmission by disconnecting the telephone line. For details, refer to Cancelling Transmission (Disconnection of Communication) on page 3-12. 1 Press the Status/Job Cancel key. Send Job Status: a b 0010 0123456789 r 0011 p Broadcast *00*1*7*****9*8*7*6*5*4*3*2*1*0**** [ Cancel ] [ Menu ] 2 Press the or key to select [Send Job Status]. 3 Press the OK key. 4 Press the or key to select the job you want to cancel. 5 Press [Cancel] (the Left Select key). 6 Press [Yes] (the Left Select key). Communication is canceled. NOTE: Canceling is also possible by pressing [Menu] (the Right Select key), then selecting [Cancel Job] and pressing the OK key. 3-11