Kyocera TASKalfa 180 180/220 Operation Guide Rev-2 - Page 155
Glossary, Auto Paper Selection, Auto Sleep Mode, dpidots per inch, EcoPrint Mode, Low power mode
View all Kyocera TASKalfa 180 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 155 highlights
Glossary Auto Paper Selection A function to automatically select paper in the same size as original at printing Auto Sleep Mode A mode designed for electrical power saving, activated when the machine is left unused or data transfer for a specific period. In Sleep mode, power consumption is kept to a minimum. dpi(dots per inch) A unit for resolution, representing the number of dots printed per inch (25.4 mm). EcoPrint Mode A printing mode that helps save toner. Copies made in this mode are thus lighter than normal. Low power mode This mode is provided for power saving. This mode is activated when operation on the main body and transmission or reception of data do not occur for a preset time. In this mode, the machine consumes less power than in the standby mode. The default setting of the preset time is 1 minute. You can use the operation panel to change this time. Multi Purpose (MP) Tray The paper supply tray on the right side of the machine. Use this tray instead of the cassettes when printing onto envelopes, Hagaki, transparencies, or labels. PPM (prints per minute) This indicates the number of A4 size printouts made in one minute. Sleep mode This mode is provided for power saving. This mode is activated when operation on the main body and transmission or reception of data do not occur for a preset time. In this mode, consumed power is reduced to the minimum. The default setting of the preset time is 1 minutes. You can use the operation panel to change this time. Status Page The page lists machine conditions, such as the memory capacity, total number of prints and scans, and paper source settings. OPERATION GUIDE Appendix-17