Kyocera TASKalfa 180 180/220 Operation Guide Rev-2 - Page 99
Auto Clear Time, Low Power Mode Transition Time, System Menu, Auto Sleep
View all Kyocera TASKalfa 180 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
System Menu System Menu: 51.Auto Sleep 2 Press or to select select 51.Auto Sleep, and then press the OK key. 3 Press or to select On in the case when the transition to Auto Sleep is to be made or Off when it is not, and then press the OK key. The display will return to that of Step 2. Auto Clear Time NOTE: If the Auto Sleep function interferes with your copy operations, disable the function. Before disabling the Auto Sleep function, you may want to try lengthening the amount of time before the Auto Sleep function engages. 5 Set the time interval to automatically return the copier to Ready to copy. state when copying is finished. System Menu: 52.AutoClearTime 1 Display the System Menu. (Refer to System Menu Operation Procedures on page 5-7.) 2 Press or to select select 52.AutoClearTime, and then press the OK key. 3 Press or to select a time interval from 10 to 270 (seconds). NOTE: Set the time interval to a longer length of time in the case where the copier is used often and to a shorter time interval when it is used infrequently. This can be set when the Auto Clear setting has been set to On. (Refer to Auto Clear Setting on page 5-20.) 4 Press the OK key. The display will return to that of Step 2. Low Power Mode Transition Time Set the time interval from the time operations end to the automatic engagement of the Low Power Mode. 1 Display the System Menu. (Refer to System Menu Operation Procedures on page 5-7.) OPERATION GUIDE 5-21