Kyocera TASKalfa 180 180/220 Operation Guide Rev-2 - Page 77
Program Function, Registering Programs
View all Kyocera TASKalfa 180 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Copying Functions Program Function After registering sets of frequently used functions as a single program, you can simply press the program number as needed to recall those functions. You can also name the programs for easy identification when recalling. Registering Programs Use the procedure below to register a program. The following procedure is an example of registering the copying function. 4 1 Set the Copy Mode to be registered. 2 Press the Program key for 3 seconds. 3 Enter the program number (0 to 9) using the numeric keys and press the key for 3 seconds. The display of the number entered will blink 2 times and the program will be registered. NOTE: If the same number as a program already registered is input, the prior program is overwritten. Recalling Programs Use the procedure below to recall a registered program. 1 Press the Program key. 2 Press or to select the number of the program to be used, and press the OK key. NOTE: You can also select the program number using a numeric key. 3 Place the originals and press the Start key. Copying starts with the settings that were registered. OPERATION GUIDE 4-25