Kyocera TASKalfa 180 180/220 Operation Guide Rev-2 - Page 55
Adjusting Density, Auto Density, Description, Lighter, Darker
View all Kyocera TASKalfa 180 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Copying Functions Adjusting Density The copy density is adjusted manually. To make the copy darker, press Density Adjustment key on the right and move the density scale to the right. To make the copy lighter, press Density Adjustment key on the left and move the exposure scale to the left. Pressing the Auto Density key will detect the copy density and set it to the optimal setting. Mode Description Auto Density mode The machine detects the density of the original 4 and sets the optimum density. Manual Density mode Adjust the density by pressing Lighter or Darker key. NOTE: The density can be adjusted when the overall exposure is too light or too dark using the Auto Density key. (Refer to Auto Exposure Adjustment on page 5-11.) The Copy Density Adjustment can be set to Auto Density Mode when setting the Default Settings. (Refer to Initial Density on page 5-9.) Pressing Density Adjustment key will move the scale in increments of 0.5 and allow even finer adjustment of the density. (Refer to Density Steps on page 5-10.) OPERATION GUIDE 4-3