Kyocera TASKalfa 180 180/220 Operation Guide Rev-2 - Page 85
engages Sleep Mode Transition Time., On: Enabled sound
View all Kyocera TASKalfa 180 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
System Menu System Menu Items Description Available settings Reference Page 45.4 in 1 Layout Sets the layout for the order in which the originals will appear in the 4-in-1 Layout mode. Portrait 1* Portrait 2 Landscape 1 Landscape 2 4-14 46.Combine Border Selects the type of borderline to be used in the Layout mode. Off* Solid Dotted 4-14 47.Rotate/Offset Sets the copier so that each copy set is rotated and collated when it is collate copied. On: Rotational Collating Enabled Off: Rotational Collating Disabled* 5-19 48.Auto Rotation Sets of copied documents are output landscape/ On: Enabled* 5-19 portrait alternately, allowing easy separation of each set from the other. Off: Disabled 5 49.Silent mode Shortens the amount of time the internal motor continues to run after the copy is produced. Use this setting in cases when the motor noise is bothersome. 0, 5, 10, 15, 30 (seconds) (*10) 5-20 50.Auto Clear Sets the copier so that automatic clearing is executed after a set amount of time has elapsed after the copy is produced. (Refer to Auto Clear function on page 1-6.) On: Enabled* Off: Disabled 5-20 51.Auto Sleep The Auto Sleep mode will be entered after a set period of time has passed after the final copy has been produced or during which no operations have been performed. If the Auto Sleep function interferes with your copy operations, disable the function. Before disabling the Auto Sleep function, you may want to try lengthening the amount of time before the Auto Sleep function engages (Sleep Mode Transition Time). On: Enabled* Off: Disabled 5-20 52.AutoClearTime Sets the time interval prior to the automatic operation of the Auto Clear function when On (Enable) has been selected as the 50.Auto Clear setting. This will not be displayed when 50.Auto Clear is set to Off. 10 to 270 (10-second units) (*120) 5-21 53.LowPower Time Sets the time interval prior to the automatic engagement of the Low Power mode after copy operations have been completed. 1, 5, 15, 30, 45, 60, 90, 120, 180, 240 (minutes) (*1) 5-21 54.AutoSleepTime Sets the time interval prior to the automatic operation of the Auto Sleep function when On (Enable) has been selected as the 51.Auto Sleep setting. This will not be displayed when 51.Auto Sleep is set to Off. 1, 5, 15, 30, 45, 60, 90, 120, 180, 240 (minutes) (*1) 5-22 55.Alarm The Alarm can be set to sound when a key on the Operation Panel is pressed or in cases when errors occur, etc. On: Enabled (sound alarm) Off: Disabled (no alarm)* 5-22 OPERATION GUIDE 5-7