Kyocera TASKalfa 180 180/220 Operation Guide Rev-2 - Page 74
-Sided Copy Reverse Side Rotation Setting, Scanning., Place next, original., Duplex 2nd, Rotation
View all Kyocera TASKalfa 180 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Copying Functions The procedure for using two-sided/duplex copying is explained below. 1 Place the originals on the platen. Scanning. Place next original. NOTE: The underside Rotate Copy can also be set in the System Menu. (Refer to 2-Sided Copy Reverse Side Rotation Setting on page 4-5.) The value set in the System Menu will inherit the value that is set at the time when the copy is made. 2 Press [2-sided], select the type of original, and select , or to light up the corresponding display. 3 Enter the number of sets of copies using the numeric keys. 4 Press the Start key to start scanning. If the originals have been set in the optional document processor, copying starts automatically. If the original has been set on the platen, a message prompting replacement of the original is displayed. In this case, proceed to the next step. 5 Replace the original and press the Start key Scanning of the original is performed. 6 After scanning all originals, press the OK key to start copying. 2-Sided Copy Reverse Side Rotation Setting Follow the procedure below to change the rotation setting for the reverse side when making 2-Sided copies. 42.Duplex 2nd Rotation On 1 Press the 2-sided key for 3 seconds. The System Menu for the reverse side setting of 2Sided Copies will be displayed. 2 Press or to select Rotation On in the case where the reverse side is to be rotated or Rotation Off when it isn't to be rotated, and then press the OK key. The display will blink and the copier will return to the state where copying can be continued. 4-22 OPERATION GUIDE