Kyocera TASKalfa 180 180/220 Operation Guide Rev-2 - Page 67
Types of Boundary Lines, 4 in 1 Layout Order, Combine, Start
View all Kyocera TASKalfa 180 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Types of Page Boundary Lines The following types of the boundary lines are available. Copying Functions 4 None Solid Dotted The procedure for using Combine mode copying is explained below. 1 Place the originals on the platen. Scanning. Place next original. NOTE: The underside Rotate Copy can also be set in the System Menu. (Refer to 2-Sided Copy Reverse Side Rotation Setting on page 4-5.) The value set in the System Menu will inherit the value that is set at the time when the copy is made. 2 Press the Combine key to light up the or indicator. 3 Enter the number of sets of copies using the numeric keys. 4 Press the Start key to start scanning. If the originals have been set in the optional document processor, copying starts automatically. If the original has been set on the platen, a message prompting replacement of the original is displayed. In this case, proceed to the next step. 5 Replace the original and press the Start key. Scanning of the original is performed. 6 After scanning all originals, press the OK key to start copying. 4 in 1 Layout Order Follow the procedure below to change the order in which pages are to be laid out within the copied page when making 4 in 1 copies. OPERATION GUIDE 4-15