Kyocera TASKalfa 180 180/220 Operation Guide Rev-2 - Page 38
Cassette Size Detection, System Menu, Cassette1Size
View all Kyocera TASKalfa 180 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Preparation before Use • If the length and width guides are not flush against the paper, a size that is different from the actual size may be displayed on the message display. • When the paper has become wrinkled from moisture and cannot be fed, set the paper so that the wrinkled side is toward the length guide. NOTE: When loading paper into the cassette, set it with the side to be printed facing up. 6 Set the accompanying paper sheet so that the paper size set in the cassette can be identified from the front of the cassette. 7 Gently push the cassette back in. IMPORTANT: When the machine will not be used for a long period of time, remove the paper from the cassette, put it in a storage bag, and seal the bag in order to protect the paper from moisture. Cassette Size Detection Set the Size Detection on the operation panel to match the size of the paper loaded in the cassette. The copier has been set at the time of shipping for automatic detection in inch units for inch specifications, or in centimeter units (A-B columns) for metric specifications. 1 Press the Paper Selection key for 3 seconds. The System Menu will be displayed. System Menu: 19.Cassette1Size 2 Press or repeatedly until 19.Cassette1Size appears, and press the OK key. NOTE: When setting the size of the optional cassette (2 to 4), display 20.Cassette2Size, 21.Cassette3Size and 22.Cassette4Size. 3 Press or to select Auto Detect mm, AutoDetect inch, Oficio 2, 8K or 16K. 2-6 OPERATION GUIDE