LG L26W58HA Operation Guide - Page 48

DetaiLed Descriptions of InstaLLer Menu [terns 000 - INSTALLER SEQUENCE Specifies ent_ sequence to the Instat_r Menu. 0 = 9876 i = 4321 2 = 1478 3 = 3698 001 - POWER MANAGE (Power Management) Determines hours of no activity before automatic shutoff. The POWERMANAGEfunction is for saving energy. If set to O, Power Manage is OFF.Settings range from 0 - 7, with i - 7 representing the hours that the TV wilt remain On, unless there has been activity from either the control panel or remote controL. 002 - AC ON (AC Power Switchable) If set to I, aLLowsthe L26W58HA to turn On just by applying AC power. Pressing the On button is not necessary. This is desirable if the L26WbSHA is plugged into a cable box or a power outlet controLLed by a waLLswitch. Use ADO Left/Right arrow to choose 0 or i where O is the default is OFF,and i is On. *Note: If set to 1 (On), the L26W58HA does not respond to On/Off commands from either the remote or the display control panel, and the SLEEPTIMERis aLso nonfunctional. 005 - CHAN LOCK (Channel Lock) CHAN LOCKis ideal if the system must always be on the same channel Changing channels with Channel Up/Down or keypad numbers is impossible. Channel Lock is inactive if set to 0 (defauLt). GeneraLLy,this feature is used in connection with STARTCHANNEL (InstaLLer item 004) where the start channel may, for example, be set to 3 or 4. If the start channel is 3, then the L26W58HA wiLL remain Locked on Channel 3. *Note: For Items 007, OOB and 009 For Legacy reasons, the scale used is 0 - 63. The PTCsoftware wit[ translate this to the 0 - 100 scale used by the TV. To translate a TV volume Level to the instaLLermenu value, use the foLLowing formula: InstaLLer VaLue= TV VaLue x 63 100 Enter only the whole number (disregard fractions). 003 - BAND/AFC (Band/Automatic Frequency Control) SeLects the tuning band. There are 4 possibLe settings for this option: 0 = Broadcast 2 = HRC 1 = CATV 3 = IRC If some channels were not found by Auto Program, select the appropriate Band setting here and add the channels using the Channel List option in the Channel Menu. 004 - STRT CHANNEL (Start ChanneL) If active, this function aLLowsyou to determine the initial channel number when the L26W58HA is turned On. This feature is useful for an in-house information channeL, since the L26W58HA would always select that channel when it is turned On. Setting this to 255 causes the Last channel viewed when the L26W58HA was turned Off, to be the tuned to channel when the L26W58HA is turned On again. 255 = Last channel 126 Map to Channel 3. I - 125 = Ch X 0 = Aux 127 Map to Channel 4. 007 - STRTVOLUME (Start Volume) This function aLLowsthe InstaLLer to determine the initial volume Level setting when the L26WbSHA is turned On. This feature is userut for an in-house information channeL, since the L26W58HA would always se[ect that volume Level when it is turned On. The range of values are O - 63, 255. If 255 is selected, the current volume Level wilt be retained in memory when the L26W58HA is turned Off; at turn On, the volume Level wilt be automaticaLLy set at the previous or [ast [ever. 008 - MIN VOLUME (Minimum VoLume) This function determines the minimum volume Level aLLowabLewith the VOLUME (VOL) Up/Down controL. In this way, for example, someone cannot set the volume too tow to hear. The value range is from Oto 63 -- change values with ADJ Left/Right arrow. The factory default is O, which provides the fuLL range of volume controL, if item 009 MAX VOLUMEis also set to 63. It may be best to set the same value on every L26W58HA. *Note: The minimum volume level cannot have a value setting higher than the MAX VOLUMElevel (described below). 009 - MAX VOLUME (Maximum Volume) This function determines the maximum volume Level aLLowabLewith the VOLUME (VOL) Up/Down controls. In this way, for example, someone can not set the volume Level high enough to disturb others. (Continued on next page) PAG E 48