LG L26W58HA Operation Guide - Page 51
Start
View all LG L26W58HA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
(Continued from previous page) 087 - REAR RGB EN. (Rear RGB1 Enable) ControLs access to rear RGB1 input on display paneL. Set to 1 to enable RGBI input for DTV.Set to 0 to disable RGB1 input. *Note: The setting above is ignored if Installer item 093 RiP AVAILABLE, is set to 1. Then 087 - REAR RGB EN. above, always resets itse_ to PC (i) -- regmdless of what value appears for item 087 on the Installer menu. 088 - EN NOISE MUTE (Enable Noise Mute) If set to 1, audio mutes if no signal is present. 090 - KEY LOCK If set to 1, display panel keyboard is Locked out, not avaiLabLe to end user. [R receiver remains functional O91 - YPrPb2 EN. (Rear Component Video 2 Enable) Set to 1 to enable display pane[ Component 2 input. Set to 0 to disable display panel Component 2 input. 102 - ATSC BAND Sets up TV to receive different types of incoming signals: O=Broadcast, I=CATV, 2=HRC, 3=IRC, 4=Same as NTSC. 103 - ATSCTUNE MODE SeLects ATSCtuning mode: O=Virtua[, 1=Physical *Note: The setting above is ignored if Znstaller item 102 ATSCBAND, issetto I=CATV,2=HRC, or 3=IRC. Then 103 - ATSC TUNE MODE above always resets itself to Physical (I), regardless of what value appears for item i03 on the installer menu. 104 - START MINOR CHANNEL Sets XX-XX minor starting channel at power up: O=NTSC.If not O, number selected is the Minor start channel number. 106 - ASP RATIO LOCK (Aspect Ratio Lock) Set to 1 to retain previous aspect ratio with power Off. Set to 0 to retain default aspect ratio with power Off. See item 96 DefauLt Aspect Ratio above. 092 - RGB2 ENABLE (Red-Green-Blue 2 Enable) Set to 1 to enable display pane[ Video 3 input for Composite Video, set to 2 to enable for S-Video. Set to 0 to disable display panel Video 3 input. 094 - SAP MENU EN (2nd Audio Program) Set to i to enable SAP feature, if avaiLabLe. Set to 0 to disable SAP feature. 096 - DEF. ASP. RATIO (Default Aspect Ratio) SeLects default aspect ratio at power up, see settings below. Set to 0 for set by program. Set to 1 for 4:3. Set to 2 for 16:9 (Factory DefauLt). Set to 4 for Zoom 1 Set to 5 for Zoom 2 107 - BANNER SELECT Not appLicabLe. 116 - VIDEO MUTE EN (Video Mute Enable) Set to 0 for normaL. Set to 1 for blank. 117 - FACT DEFAULT(Factory Default) Set to 0 for normaL. Set to 1 to toad default settings for all instaLLer menu items. defaults and clear the channel List inc[uding erasing any _ asAsiRgnNeIdNGC: hSaenttninegl Itchoinss toand1 wLiatb[eLresl.oad the factory PAGE 51